Firmware for Saia PCD® COSinus

  • The core of the Saia PCD® operating systems was developed by us between 2001 and 2003 as part of a European cooperation project with Philips and Nokia. We then expanded the core to an operating system for advanced, industry-quality measuring, control and regulation devices. A dedicated operating system for MRC technology – a control operating system (COS). Developed in-house and with all aspects fully mastered.

     

    The COSinus FW  is available for the following systems:

    • PCD1.M0xx0
    • PCD1.M2xx0
    • PCD2.M4x60
    • PCD2.M5xx0
    • PCD3.Mxxx0
    • PCD3.Mxx60
    • PCD3.M6860
    • PCD3.M6880
    • PCD3.T665/T666/T666
    • PCD7.D4xxxT5F pWeb Panel
    • PCD7.D443WT5F pWeb Panel
    • PCD7.D4xxV VGA MB Panel
    • PCD7.D412DTPF SVGA MB Panel

    • PCD7.D4xxWTPF WVGA MB Panel
    • BACnet FW for PCD1.M2xx0, PCD2.M4x60, PCD2.M5xx0, PCD3.Mxxx0, PCD3.Mxx60
    • LonIp FW for PCD1.M2xx0, PCD2.M4x60, PCD2.M5xx0, PCD3.Mxxx0, PCD3.Mxx60

     

    Please check the Hardware dependencies listed below and do read the relase notes before updating the firmware.

Documentation

System Catalogue : Basic Properties

Extract 26-215_A0110 System Catalogue : Basic Properties

Chapter:
Basic properties of programmable Saia PCD® measuring, regulation and control devices

ENG18 .pdf 4.48 MB Download
FRA18 .pdf 4.49 MB Download
GER18 .pdf 4.50 MB Download
ITA18 .pdf 4.48 MB Download

COSinus What is new

Flyer COSinus What is new

COSinus 1.22.10 .pdf 0.39 MB Download

PCD1 / _Firmware Classic

  • It's possible to connect SBC PCD's directly to the internet? (FAQ #102060)
  • What are the differences between the COSinus firmwares FW 1.28.11 and FW 1.28.51? (FAQ #102058)
  • Why the RS-485 S-Bus communication between the PCD master and the slave does fail sometime, if FW 1.28.20…1.28.33 is used? (FAQ #102026)
  • PCD Firmware 1.28.16 or 1.24.69 fix the Ethernet frame padding information leakage (FAQ #102011)
  • What are the differences between the COSinus firmwares FW 1.28.11 and FW 1.28.51? (FAQ #102010)
  • Lon Bindings lost after power off / on with FW 1.26.15 (FAQ #101999)
  • What are the differences between the COSinus firmwares FW 1.24.67 and FW 1.26.31? (FAQ #101987)
  • What is the meaning of the PCD history entry ‘FWDnld UnknownFW’? (FAQ #101959)
  • How to find more information based on the error message "SF not loaded"? (FAQ #101568)
  • What does CSF stand for? (FAQ #101566)
  • Overview of the current production firmware versions (FAQ #101304)
  • How to implement a software watchdog (FAQ #101285)
  • Why do I sporadically get communication errors when connecting a PCD/PCS in "Secure S-Bus Data Mode"? (FAQ #101180)
  • Why do I get a "68k add Error" when writing a text on the S-Web Server? (FAQ #101049)
  • Why is the message: "Failed to get data on alarm.exe" displayed on the alarming page? (FAQ #100963)
  • Is it possible reading the PCD "IP address" from the user program? (FAQ #100952)
  • Register corruption on a PCD1.M1x5 due to bug in firmware booter (FAQ #100645)
  • Error LED of PCD is lit! How to find the problem? (FAQ #100269)
  • What EPROM burner is recommended to create firmware chips for PCD's? (FAQ #100256)
  • Baudrate limitation on serial ports (FAQ #100252)
  • Communication interface isn't reset on SW watchdog restart with option XOB0 enabled (FAQ #100243)
  • Firmware version naming of non-Saia PCD® COSinus systems (FAQ #100176)
  • Not all History entries can be found in the Online Help of PG5 (FAQ #100173)
  • Why is the instruction DSP not supported on Saia PCD® COSinus systems? (FAQ #100034)

PCD2 / _Firmware Classic

  • It's possible to connect SBC PCD's directly to the internet? (FAQ #102060)
  • What are the differences between the COSinus firmwares FW 1.28.11 and FW 1.28.51? (FAQ #102058)
  • Why does the PCD2.M5540 show the history error message 'FABINFO CRC FAIL' or the entry 'Fab. Date (year/week): 2000/00; BAD PROD INFO CHECKSUM' in the diagnostic file and in the hardware info of the PG5 Online configurator? (FAQ #102040)
  • Why the RS-485 S-Bus communication between the PCD master and the slave does fail sometime, if FW 1.28.20…1.28.33 is used? (FAQ #102026)
  • PCD Firmware 1.28.16 or 1.24.69 fix the Ethernet frame padding information leakage (FAQ #102011)
  • What are the differences between the COSinus firmwares FW 1.28.11 and FW 1.28.51? (FAQ #102010)
  • Lon Bindings lost after power off / on with FW 1.26.15 (FAQ #101999)
  • What are the differences between the COSinus firmwares FW 1.24.67 and FW 1.26.31? (FAQ #101987)
  • What is the meaning of the PCD history entry ‘FWDnld UnknownFW’? (FAQ #101959)
  • How to find more information based on the error message "SF not loaded"? (FAQ #101568)
  • What does CSF stand for? (FAQ #101566)
  • Which hardware revision of the PCD2.M5_ is needed for firmware 1.14.23? (FAQ #101490)
  • What are the differences between firmware 1.10.51 and 1.14.23? (FAQ #101470)
  • Why can't I send more than 512 bytes using the STXT instruction? (FAQ #101468)
  • Can I have more than 16 COBs? (FAQ #101467)
  • Why is the error bit 7 or 8 set when I try to execute a "Backup DB to flash"? (FAQ #101466)
  • What are the differences between firmware 1.10.16 and 1.10.51? (FAQ #101422)
  • How to define a comma as separator in interpreted texts? (FAQ #101392)
  • Potential data loss on SD cards bigger than 256 MBytes (FAQ #101377)
  • Overview of the current production firmware versions (FAQ #101304)
  • What does "Saia PCD® COSinus" stand for? (FAQ #101297)
  • How to implement a software watchdog (FAQ #101285)
  • Why does the S-I/O communication no longer work on a PCD3 or a PCD2.M5? (FAQ #101244)
  • What is the "WebServer2" on Saia PCD® COSinus systems? (FAQ #101191)
  • Can I calulate with IEEE floating point values on a PCD system? (FAQ #101188)
  • Can I read a value from a PCD text and copy it into a register? (FAQ #101187)
  • Is it possible to search an expression within a PCD text? (FAQ #101186)
  • Why do I sporadically get communication errors when connecting a PCD/PCS in "Secure S-Bus Data Mode"? (FAQ #101180)
  • The XOB 8 is no longer called on the systems Saia PCD® COSinus. (FAQ #101137)
  • What criterias are to be fulfilled for sending e-Mails from the PCD? (FAQ #101054)
  • Why do I get a "68k add Error" when writing a text on the S-Web Server? (FAQ #101049)
  • Why is the message: "Failed to get data on alarm.exe" displayed on the alarming page? (FAQ #100963)
  • Is it possible reading the PCD "IP address" from the user program? (FAQ #100952)
  • How does the system watchdog work? (FAQ #100908)
  • Why are broadcast telegramms not working anymore on the PCD3 or PCD2.M480 (FAQ #100798)
  • New firmware version names for Saia PCD® COSinus systems (a.bb.cc) (FAQ #100741)
  • Different handling of the TBSY flag (in MC mode) between PCD3 / PCD2.M5 and older systems (FAQ #100655)
  • Booter update on PCD2.M150 (FAQ #100606)
  • Firmware download on a PCD2.M150 (FAQ #100598)
  • S-Bus Slave on Port 3 doesn't work with FW 020 on the M480 (FAQ #100389)
  • lose Hardware settings after Firmware update (FAQ #100366)
  • FW depending differences in the handling of the diagnosic flags (FAQ #100321)
  • Incompatibility of old FW and new Profibus DP configurator (FAQ #100319)
  • Which Flash chip to use for which usage? (FAQ #100309)
  • Error LED of PCD is lit! How to find the problem? (FAQ #100269)
  • What EPROM burner is recommended to create firmware chips for PCD's? (FAQ #100256)
  • Baudrate limitation on serial ports (FAQ #100252)
  • Communication interface isn't reset on SW watchdog restart with option XOB0 enabled (FAQ #100243)
  • Software Watchdog mustn't be used with FW 0C1 on PCD2.M150! (FAQ #100218)
  • Firmware version naming of non-Saia PCD® COSinus systems (FAQ #100176)
  • Not all History entries can be found in the Online Help of PG5 (FAQ #100173)
  • Why is the instruction DSP not supported on Saia PCD® COSinus systems? (FAQ #100034)

PCD3 / _Firmware Classic

  • It's possible to connect SBC PCD's directly to the internet? (FAQ #102060)
  • What are the differences between the COSinus firmwares FW 1.28.11 and FW 1.28.51? (FAQ #102058)
  • On a PCD3.M6860 it’s possible to use BACnet on the Ethernet port ETH1 and/or on ETH2? (FAQ #102031)
  • Why the RS-485 S-Bus communication between the PCD master and the slave does fail sometime, if FW 1.28.20…1.28.33 is used? (FAQ #102026)
  • PCD Firmware 1.28.16 or 1.24.69 fix the Ethernet frame padding information leakage (FAQ #102011)
  • What are the differences between the COSinus firmwares FW 1.28.11 and FW 1.28.51? (FAQ #102010)
  • Lon Bindings lost after power off / on with FW 1.26.15 (FAQ #101999)
  • What are the differences between the COSinus firmwares FW 1.24.67 and FW 1.26.31? (FAQ #101987)
  • What is the meaning of the PCD history entry ‘FWDnld UnknownFW’? (FAQ #101959)
  • MUKE error 100xxxxxH (FAQ #101933)
  • How to find more information based on the error message "SF not loaded"? (FAQ #101568)
  • What does CSF stand for? (FAQ #101566)
  • What are the differences between firmware 1.10.51 and 1.14.23? (FAQ #101470)
  • Why can't I send more than 512 bytes using the STXT instruction? (FAQ #101468)
  • Can I have more than 16 COBs? (FAQ #101467)
  • Why is the error bit 7 or 8 set when I try to execute a "Backup DB to flash"? (FAQ #101466)
  • What are the differences between firmware 1.10.16 and 1.10.51? (FAQ #101422)
  • How to define a comma as separator in interpreted texts? (FAQ #101392)
  • Potential data loss on SD cards bigger than 256 MBytes (FAQ #101377)
  • Is the "full duplex" mode supported by the Ethernet ports of a PCD? (FAQ #101365)
  • Overview of the current production firmware versions (FAQ #101304)
  • What does "Saia PCD® COSinus" stand for? (FAQ #101297)
  • How to implement a software watchdog (FAQ #101285)
  • Why does the S-I/O communication no longer work on a PCD3 or a PCD2.M5? (FAQ #101244)
  • What is the "WebServer2" on Saia PCD® COSinus systems? (FAQ #101191)
  • Can I calulate with IEEE floating point values on a PCD system? (FAQ #101188)
  • Can I read a value from a PCD text and copy it into a register? (FAQ #101187)
  • Is it possible to search an expression within a PCD text? (FAQ #101186)
  • The XOB 8 is no longer called on the systems Saia PCD® COSinus. (FAQ #101137)
  • Why does the communication on the PCD3.F281 not work? (FAQ #101090)
  • Why does a "KRNL ERROR" or a "SWTO Error" occur? (FAQ #101069)
  • What criterias are to be fulfilled for sending e-Mails from the PCD? (FAQ #101054)
  • Why is the message: "Failed to get data on alarm.exe" displayed on the alarming page? (FAQ #100963)
  • Is it possible reading the PCD "IP address" from the user program? (FAQ #100952)
  • How does the system watchdog work? (FAQ #100908)
  • How to dump the memory of a PCD (with Saia PCD® COSinus firmware)? (FAQ #100833)
  • Why are broadcast telegramms not working anymore on the PCD3 or PCD2.M480 (FAQ #100798)
  • Why is the Port 3 on the PCD3.M5340 not running correctly in RS 485 mode? (FAQ #100765)
  • Download of PCD3 firmware fails on END command (NAK response) (FAQ #100742)
  • New firmware version names for Saia PCD® COSinus systems (a.bb.cc) (FAQ #100741)
  • Why can't I connect a PCD3.M5xx0 over the serial PGU port? (FAQ #100737)
  • PCD3.Mxxxx Real Time Clock (RTC) corruption (FAQ #100712)
  • Can I use the character mode with XON/XOFF protocol on NT-PCD's? (FAQ #100700)
  • Download of PCD3 firmware fails on END command (no response) (FAQ #100681)
  • Download of PCD3 firmware fails with "NAK response" (FAQ #100679)
  • Different handling of the TBSY flag (in MC mode) between PCD3 / PCD2.M5 and older systems (FAQ #100655)
  • Conflict between communication module (PCD3.F1xx) and memory module (PCD3.Rxxx) (FAQ #100636)
  • allowed Firmware for PCD3.M5540 hardware version D (FAQ #100590)
  • Intelligent modules aren't correctly detected on HW version older than "D" (FAQ #100549)
  • Why is the message: "cannot create page content yet" appears from time to time (FAQ #100527)
  • PCD8.K120 doesn't work after FW download to PCD3 (FAQ #100524)
  • Why does "Sasi Slave" on Port 1 / 0 (RS232) of the PCD3 generate an error? (FAQ #100420)
  • PCD3 problem with "Real TIME CLOCK" Firmware V010 (FAQ #100387)
  • lose Hardware settings after Firmware update (FAQ #100366)
  • FW depending differences in the handling of the diagnosic flags (FAQ #100321)
  • Error LED of PCD is lit! How to find the problem? (FAQ #100269)
  • Download of the wrong FW to a PCD3 possible (FAQ #100259)
  • What EPROM burner is recommended to create firmware chips for PCD's? (FAQ #100256)
  • Firmware version naming of non-Saia PCD® COSinus systems (FAQ #100176)
  • Not all History entries can be found in the Online Help of PG5 (FAQ #100173)
  • Why is the instruction DSP not supported on Saia PCD® COSinus systems? (FAQ #100034)

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download