"SAIA_ASSERT failed" error on resize FBox in Fupla

FAQ #100335

On the attempt of resizing some FBoxes in Fupla SP1.3.120 (delivered with PG5 1.3.120) a "SAIA ASSERT failed..." error message will pop up.

Therefore it isn't possible resizing all resizeable FBoxes with this Fupla version.

 

Symptom
image
SAIA_ASSERT failed at line 105 in d:\data\Projects\PG5_1_3\sfupvar.cpp:
IsInvertable()

 

Solution
The problem is to be fixed by running the attached patch. Please make sure that the PG5 is not running while installing the patch.

Important note
The attached patch does only work for PG5 SP1.3.120 and resolves only the problem described above.
Do not install this patch it if you have installed an other version of PG5 1.3!

 

Categories

Local FAQ Deutschland / Fupla

Last update: 26.05.2015 06:49

First release: 09.03.2005 11:03

Views: 1225

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download