How to display more than 5 digits using HMI Editor!

FAQ #100368

When using the default settings of the HMI Editor the maximal amount of digits that can be shown are 5 digits per line. If more then 5 digits are to be shown the HMI elements can be configured to be represented on two lines.


For displaying more than 5 digits for the value of an object, set the option "Lines per element in Object" to "2 lines". This option can be found in the "Settings" tab of the HMI Editor.
As result, the elements will occupy 2 lines where the value to be shown will be represented on the second line with maximal 9 digits. Further on, also the units configured for the elements will be shown on the display.



PCD7 / D23x

Local FAQ Deutschland / HMI Editor

Last update: 21.05.2015 11:12

First release: 18.05.2005 15:20

Views: 2339

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.