Does M-Bus need a Full RS 232 interface?

FAQ #100416

No, on the PCD a reduced RS 232 can be used (PCD7.F520 / one part of PCD7.F522). However, some communication partners will need full RS 232. In this case you can maybe handle it with a bridge or you have to use a Full RS 232 Port on the PCD, too (PCD7.F120 / PCD7.F522).

 

 

 

Categories

PCD7 / Fxxx

Communication

Last update: 27.05.2015 20:07

First release: 12.08.2005 09:49

Views: 1745

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download