Is the XOB 5 "No response from I/O module (I/O Quit Failure)" supported by the PCD3?

FAQ #100501

No the XOB 5 is only supported by the PCD4 and PCD6

 

Reason
The reason is, that the "IO Bus Quit fail" is a hardware interrupt created by the PCD4 and PCD6 I/O modules. On the PCD3 and also PCD2 I/O modules it is not supported and therfore not available.

 

 

Categories

PCD1

PCD2

PCD3

Last update: 28.05.2015 15:06

First release: 13.12.2005 15:47

Views: 3076

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download