Why is the error LED on after having sent an SMS message?

FAQ #100582

After the SMS has been sent the error LED is switched on immediately.

 

Problem
After each transmission of an SMS message the Error LED is switched on on the PCD3. Despide of this the SMS is send correctly.

Reason
The reason is a problem in the firmware. The SMS will be sent properly but the Error LED is always on after the first SMS has been send

Solution
This problem is corrected in firmware 030 and later.

 

Categories

PCD3 / Mxxx

PG5 2.0 / Modem

Last update: 25.05.2015 09:13

First release: 24.07.2006 14:41

Views: 6286

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download