When Display PCD7.D2xx/D170 is not connected in multipoint topology the application using an HMI file doesn't run properly!

FAQ #100701

If the HMI Editor project uses multipoint topologie with RTS-CTS and a display isn't connected, a wrong indexing in the HMI library may overwrite internal registers so that in some case the error LED maybe ON! If the use registers are not overwritten by the application it might create strange behaviour!!

Solution:

 

Install the attached corrected library!

 

Categories

Local FAQ Deutschland / HMI Editor

Last update: 26.05.2015 15:07

First release: 22.02.2007 16:26

Views: 798

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download