How can I modify the function presence of a standalone PCD7.L60x modules?

FAQ #100883

The first PCD7.L60x module series keeps the presence for 1 hour once the button "Presence" is pressed. It can't be desactivated manualy as it is done automatcaly after 1 hour!

This is the default parameter: R 0 = 6 (6 x 10 minutes).

 

Solution
In order to modify this default parameter connect over a S-Bus connection to the PCD7.L60x and modify the register 0 with the value 0 (instead of 6)! So one press on the presence button activates the presence and a 2nd press desactivate it!

Remark
The new PCD7.L60x have now as default the value 0 (since about begining 2008)!

 

Categories

PCD7 / Lxxx

Last update: 29.05.2015 14:42

First release: 18.02.2008 13:59

Views: 1105

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download