How to download the configuration of the PCD3.M2xxx

FAQ #101167

It is possible to configure the onboard inputs and outputs of the PCD3.M2xxx with the "device configurator". A download of this configuration is not stored.

 

Problem
It is possible to configure the onboard inputs and outputs of the PCD3.M2xxx with the "Device Configurator". When downloading the hardware configuration with the "download configuration" button of the "Device Configurator" this configuration is not loaded to the CPU.

Solution
This configuration will only be loaded to the CPU when using the program download button of the PG5 Project manager.
On the other hand it is possible to read the configuration of the PCD3.M2xxx with the "upload configuration" button of the "Device Configurator".

 

Categories

PCD3 / Mxxx

Last update: 25.05.2015 07:36

First release: 20.03.2009 15:22

Views: 1019

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download