Why is the MB VGA panel always switching back to the alphanumeric keybord if the panel is rebooted?

FAQ #101323

With firmware 1.12.01 for the VGA panel (PCD7.D4xxV) it is not possible anymore to choose the numeric keyboard as default. At every power off/on this setting is lost.

 

Symptom
It can be more comfortable to choose the numeric keyboard "keypad.teq" as default keyboard. This can be done in the setup menu. With firmware 1.12.01 it is possible to choose this in the setup menu. But: after the panel was powered off, this setting iss lost and after startup the "alphapad.teq" iss the default keyboard again.

Solution
This problem is corrected in the firmware 1.12.11 and later.

 

Categories

PCD7 / D4xx (MB Panel)

Last update: 31.05.2015 14:15

First release: 28.10.2009 15:45

Views: 29487

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download