Which instructions do I have to consider carefully when mounting a SBC MicroBrowser Touch Panel?

FAQ #101910

Here are some important mounting instructions to prevent Touch Screen from breaking.

 

There are mainly 2 rules to consider when mounting a SBC MicroBrowser Touch Panel.

Rule #1:
Do never use an electric screw driver for tighten the screws of the mounting brackets.

Rule #2:
For screen sizes 10'' and 12'': Practically, tighten the screws of upper and lower edges until the
front plate of the PCD7.D4xx slightly touches the mounting surface/wall.
Monitor and measure the deformation with help of a guide during clamping the two sides
brackets: max 1mm.

Please refer to the attached *.pdf instruction file.

 

Categories

PCD7 / D4xx (MB Panel)

Last update: 01.06.2015 06:34

First release: 15.07.2014 13:51

Views: 111

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download