The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

PG5 FBox libraries for PG5 2.0

General FBox Libraries for PG5 2.0.220

DDC Suite FBox library

Software DDC Suite FBox library

2.6.208 Archive .saiazip 8.96 MB Download

SfupBase

Software SfupBase

2.7.300 Archive .saiazip 1.83 MB Download

Hevac library

Software Hevac library

2.7.100 .saiazip 19.48 MB Download

Filesystem library

Software Filesystem library

2.7.100 .saiazip 0.10 MB Download

Communication FBox Libraries for PG5 2.0.220

CAN FBox library version 2.6.102

Software CAN FBox library version 2.6.102

EN Archive .saiazip 0.09 MB Download

EIB / KNX driver FBox library

Software EIB / KNX driver FBox library

2.7.300 Archive .saiazip 1.47 MB Download

M-Bus driver for Saia Energy Meter ALD/ALE/AWD with M-Bus

Software M-Bus driver for Saia Energy Meter ALD/ALE/AWD with M-Bus

Do NOT install this library if you already have the M-Bus library from Engiby installed, update the lib from Engiby instead.

2.7.503 New .exe 0.60 MB Download

Modbus FBoxes for general purpose

Software Modbus FBoxes for general purpose

2.7.310 .saiazip 0.30 MB Download

Modbus FBoxes for the the Energy meter ALD/ALE/AWD

Software Modbus FBoxes for the the Energy meter ALD/ALE/AWD

2.7.300 Archive .saiazip 0.58 MB Download

P-Bus FBox library (to be used with a gateway from Persy)

Software P-Bus FBox library (to be used with a gateway from Persy)

2.0.017 Archive .saiazip 0.55 MB Download

Documentation to PG5 2.0 Getting Started Example (V1)

Manual Documentation to PG5 2.0 Getting Started Example (V1)

The example can be found here: Services/Getting started/Program examples/PG5 2.0/Communication

EN1 Archive .pdf 0.85 MB Download

FBox library for Room Controller PCD7.L60x-1 (supporting from firmware SV2.11) PG5 2.0/2.1/2.2

Software FBox library for Room Controller PCD7.L60x-1 (supporting from firmware SV2.11) PG5 2.0/2.1/2.2

New FBoxes for "variable fan speed" function, which can only be used with PCD7.L60x-1 controllers from FW SV3.00.

Corrections/modifications:
Since V2.6.810:
- Minimum value for max. Fan limited to step 1 in 'Fan Configuration' and 'Fan Room 3', that no problem with deactivation of the cooling or heating output can be created anymore. (If fan max speed will be set to 0, then a safety function will be activated and the heating output will be deactivated)
- Bugfix for M/S-Mode in 'HVC Room' FBox

-------------------------------------------------

 

 

2.6.810 New .saiazip 0.28 MB Download

Room controller PCD7.L79x(N)

Software Room controller PCD7.L79x(N)

2.6.132 Archive .saiazip 0.96 MB Download

Serial-S-Bus FBoxes for the the Energy meter ALD/ALE/AWD

Software Serial-S-Bus FBoxes for the the Energy meter ALD/ALE/AWD

V2.6.191 Archive .saiazip 1.10 MB Download

DALI FBox Library

Software DALI FBox Library

Dali FBox library for PG5 2.0.220.200 and PG5 2.1.x

2.7.300 .saiazip 0.17 MB Download
2.7.300 Dali F26x library .saiazip 0.17 MB Download

Belimo FBox Lib

Software Belimo FBox Lib

MP Bus Lib 2.6.224 .saiazip 0.27 MB Download

Modem library

Software Modem library

2.7.300 .saiazip 1.58 MB Download

Lon library

Software Lon library

2.7.300 .saiazip 1.29 MB Download

WideAreaAutomation library

Software WideAreaAutomation library

2.7.300 .saiazip 0.06 MB Download

EnOcean Library

EnOcean

Software EnOcean

2.6.147 Archive .saiazip 1.82 MB Download

Http Library

Flyer Http Library

Flyer Flyer Http Library

1 Archive .pdf 0.07 MB Download
1 Archive .pdf 0.07 MB Download

Starter Guide Http Library

Manual Starter Guide Http Library

1 Archive .pdf 0.40 MB Download
1 Archive .pdf 0.40 MB Download

HTTP Client Library

Software HTTP Client Library

1.0.110 Archive .saiazip 1.12 MB Download

Getting started example for HTTP Client library

Software Getting started example for HTTP Client library

1 Archive .zip 0.02 MB Download

Good to know

With DDC Suite versions before 2.6.198 the anti blocking protection was nor working correctly.
The EnOcean FBox library version 2.6.147 contains modifications listed in FAQ 101765.
The Modbus FBox library version 2.6.220 can be addressed with the S-Bus address, see FAQ 101295.
The CAN FBox library version $2.6.102 can also be used for PCD2.M5540.
The PCD7.L79x(N) Room controller library version 2.6.130 is required for the PCD7.L79xN.
The M-Bus driver for SBC Energy Meter ALD/ALE/AWD with M-Bus 2.6.113 now also shows the total active and reactive power, see FAQ 101604.
The EIB/KNX driver FBox library version 2.6.220 contains a correction explained in FAQ 101673.
The FBox library version 2.6.176 for the ALD/ALE/AWD with Serial-S-Bus can be "grouped by function" in the FBox selector window of PG5 2.0.200.
The Energy meter with Serial-S-Bus FBox library version 2.5.171 contains a new SASI FBox explained in FAQ 101469.
The heavac library $2.6.154 contains an improvement described in FAQ 101563.
The Belimo MP Bus library contains a correction explained in FAQ 101194.
The Wide Area Automation library 2.6.151 contains a correction explained in FAQ 101545.
The PCD7.L60x Room controller library 2.6.166 contains a modification explained in FAQ 101514.
The base FBox library 2.6.154 contains correction regarding the H/L FBoxes explained in FAQ 101489.
The PCD7.L60x Room controller library 2.6.165 contains a correction explained in FAQ 101506.
The DDC Suite library 2.6.172 contains a correction described in FAQ 101492.
The heavac library 2.6.151 contains a correction described in FAQ 101491.
The File System FBox library 2.6.151 can write up to 3072 bytes with one execution, see FAQ 101154.
The Energy meter with Serial-S-Bus FBox library version 2.6.156 contains a correction explained in FAQ 101443.
The Energy meter with Serial-S-Bus FBox library version 2.6.155 contains a correction explained in FAQ 101432.
The HDLog to File FBox library version 2.6.150 contains a small correction explained in FAQ 101421.
The PCD7.L60x Room controller library 2.6.151 contains a correction explained in FAQ 101455.
The PCD7.L60x Room controller library 2.6.100 supports the PCD7.L60x firmware version SV 1.12, see description.
The Modem FBox library version 2.6.102/2.6.150 contains a small correction explained in FAQ 101315.

PCD7 / D7xx

  • Until when are PCD7.D7xx devices repaired? (FAQ #101584)
  • Where from can I get the article 4 507 4815 0? (FAQ #101536)
  • New boot version for PCD7.D761(ET), PCD7.D763(ET), PCD7.D771(ET)! (FAQ #101499)
  • Is PCD8.D81W supported by Windows 7? (FAQ #101459)
  • Is it possible to convert a project from PCD7.D7xx to PCD7.D7xxET display? (FAQ #101434)
  • The special FBox library PCD7_D7 is now available for PG5 2.0. (FAQ #101356)
  • PCD7.D763 displays a black screen or is frozen, it has lost the calibration: use VTWIN 5.22 (link included) (FAQ #101196)
  • Until when can a PCD7.D776 or a PCD7.D776ET be repaired? (FAQ #101158)
  • Bad communication over TCP/IP between PCD7.D7xx displays and PCD controllers! (FAQ #101019)
  • Why are there gaps in trend? (FAQ #100938)
  • How can I recalibrate the touch area from a PCD7.D7xx panel? (FAQ #100868)
  • PCD7.D761 displays a black screen, it has lost the calibration! (FAQ #100823)
  • PCD7.D776 loses contrast settings! (FAQ #100716)
  • URL Jump doesn't work with Microbrowser CE Terminal (FAQ #100617)
  • Why has the VT Win project such a huge size? (FAQ #100543)
  • USB to RS232 converter (FAQ #100512)
  • How can the clock of a PCD7.D7xx be written by the PCD? (FAQ #100487)
  • PCD7.D761 / D763 loses communication on Profi S-Bus! (FAQ #100477)
  • Import of global Saia PG5® symbols into VTWIN (PCD8.D81W)! (FAQ #100421)
  • Profi-S-Bus wiring of PCD7.D7xx (FAQ #100402)
  • What connector and cable typ should be used? (FAQ #100369)
  • Why are LED, F-Key and Buzzer variables not supported in Topology Bus Terminals? (FAQ #100361)
  • PCD7.D776 got blocked through programme download! (FAQ #100290)
  • Project download to PCDs with ethernet interface and to PCD7.D7xxET via ISDN router (FAQ #100251)
  • The touch screen of PCD7.D785 /788 / D787(ET) / D786 (ET) / D776 (ET) displays is blocked! (FAQ #100195)
  • PCD7.D7xx terminal works on PGU port of PCD2.M110 but not on PGU port of PCD2.M150! (FAQ #100188)
  • PCD7.D7__ET: not possible to download the programme over Ethernet! (FAQ #100125)
  • PCD7.D7xx terminals as DP Slave (FAQ #100124)
  • Calibration of Touch Screen Terminal lost for PCD7.D78_ (FAQ #100122)
  • PCD7.D7xx Terminal accessing PCD's via a Gateway station (FAQ #100003)
  • No communication between a PCD7.D7xx terminal and one or several PCD's (FAQ #100002)

PG5 2.0 / FBox Libraries

  • PG5 2.0 / 2.1 library manager, what does the message ‚Missing dependency’ means? (FAQ #101922)
  • Why is BACnet no longer working after an update of the BACnet Device Fbox? (FAQ #101886)
  • New FBox in the library SfupBase V2.7.100, it allows the use of PWM outputs of the: PCD1.M2020, PCD1.M2110R1 (PCD1.Room) and PCD1.M0160, E0 (E-Controller) (FAQ #101813)
  • What is new in the EnOcean library 2.6.147? (FAQ #101765)
  • New Belimo Valves have to use the new FBox MP VAV20/EPIV20 (FAQ #101758)
  • Why did some FBox disappear on installation of PG5 2.0.210? (FAQ #101696)
  • How to find more information based on the error message "SF not loaded"? (FAQ #101568)
  • Why does the FBox for the AWD3 display a wrong current in case a current transformer is used? (FAQ #101528)
  • Are the EnOcean receivers APG03U/B-RS485-Eno supported by the FBox library? (FAQ #101508)
  • Why does the PCD7.L60x Room controller not work correctly in "Master/Slave" mode? (FAQ #101506)
  • Is the "Modbus 1" FBox library from Engiby available for PG5 2.0, PG5 2.1 or PG5 2.2? (FAQ #101481)
  • Link to Engiby FBox libraries "Modbus 2" and "M-Bus" version 2.6.xxx (FAQ #101480)
  • Compatibility of FBox libraries from Engiby with PG5 2.0 SP1 (FAQ #101479)
  • Why is the PCD7.L60x occupancy output switching from 1 to 0 when changing a setpoint value? (FAQ #101455)
  • How long can I record data with the "HDLog to File FBox" (in csv format) using a 1 GB SD Card? (FAQ #101437)
  • Problem with the FBox HD Log to File if the dynamic space of registers is defined as <1000 or >=10 000 (FAQ #101429)
  • How to connect a TME Ethernet Thermometer to a PCD over Modbus? (FAQ #101411)
  • When do I have to use the "SASI S-Bus Extended" FBox? (FAQ #101400)
  • Why does the FBox "SASI S-Bus Extended" not work (for assigning a gateway master port)? (FAQ #101399)
  • Which devices can I connect using the JCI N2-Bus FBox library? (FAQ #101394)
  • Can I use the "PG5 2.0 Library import" for libraries I bought from Engiby? (FAQ #101357)
  • The special FBox library PCD7_D7 is now available for PG5 2.0. (FAQ #101356)
  • Why is the FBox library not visible in the Library Manager after its installation? (FAQ #101344)
  • Why is it not possible to change the phone numbers in the "Call SMS" FBox? (FAQ #101315)
  • Is Modbus supported by Saia PCD®s? (FAQ #101270)
  • How to use the Belimo fan optimizer COU24-A-MP in Fupla? (FAQ #101185)
  • Which DALI interface from Tridonic is needed in which case? (FAQ #101104)
  • Is it possible to deactivate the "secure S-Bus Data Mode"? (FAQ #101084)
  • Which FBox is needed for the VRP-M from BELIMO? (FAQ #101024)
  • How can DALI deviced be addressed? (FAQ #100863)
  • How are the DALI devices configured? (FAQ #100835)
  • When a new user key is created, is it necessary to get a new licence number from Engiby for Modbus M-Bus etc..? (FAQ #100626)

PG5 2.0 / Heavac Dialog

  • Why is it not possible to build a fupla file with Heavac Dialog FBoxes in PG5 2.0.220? (FAQ #101750)

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download