Product Category   Software   OPC Server

  • PCD8.C59xx

  • OPC Server for SBC S-Bus

OPC-Server

OPC-Server

Technical Info PP26-357 OPC-Server

SBC OPC Server for SBC S-Bus

ENG08 .pdf 1.03 MB Download
FRA08 .pdf 1.03 MB Download
GER08 .pdf 1.03 MB Download
ITA08 .pdf 1.03 MB Download

OPC DA 2.05a compliance Test (OPC foundation)

Datasheet OPC DA 2.05a compliance Test (OPC foundation)

EN Archive .pdf 0.03 MB Download

OPC Server fast introduction

Flyer OPC Server fast introduction

EN .pdf 0.53 MB Download
ES .pdf 0.76 MB Download

S-Bus OPC Server PCD8.C59001E1 | PG5 V2.1.210

Software V 2.02.17.20 / PG5 2.1.xxx S-Bus OPC Server PCD8.C59001E1 | PG5 V2.1.210

This version runs together with PG5 V2.1.210 or later

including English documentation version 2.02.17.20 and Scomm.dll version 2.1.210

V 2.02.17.20 Download

S-Bus OPC Server PCD8.C59001E1 | PG5 V2.2.130

Software V 2.02.18.03 / PG5 2.2.xxx S-Bus OPC Server PCD8.C59001E1 | PG5 V2.2.130

This version runs together with PG5 V2.2.130 or later
including English documentation version 2.02.18.03 and Scomm.dll version 2.2.130

V 2.02.18.03 37.5 MB Download

Good to know

The main differences between version 2.02.18.03 and version 2.02.16.14 are listed in FAQ 101539.

The USB driver deliverd with version 2.02.17.10 is not compatible with 64bit OS (but if PG5 2.0.200 is already installed the SComm from PG5 2.0 SP2 can be selected and doing so the 64bit compatible USB driver from PG5 will be used).

All the S-Bus OPC Server versions listed above do run as demonstration version if no license is installed. The limitation of the demonstration version is that the runtime is limited for one hour.
For the registration of the OPC Server on Windows7, the registration tool must be run as Administrator.

Software (except PG5) / OPC Server

  • Why are floats not detected when importing symbols from PG5 2.0.210? (FAQ #101709)
  • What are the main differences between OPC server version 2.02.18.03 and 2.02.16.14? (FAQ #101539)
  • Is it possible to run the S-Bus OPC-Server on Windows Vista, Windows 7 and Windows Server 2008? (FAQ #101057)
  • Why the quality of the OPC-Server items is shown as bad on the OPC-Client after importing a configuration from a csv file in to the OPC-Server? (FAQ #100929)
  • On the S-Bus OPC-Server, what is the new parameter “delay” on the station settings page? (FAQ #100910)
  • Why the OPC-Server is started several times? (FAQ #100901)
  • Information’s about TAPI modem settings on PG5. (FAQ #100891)
  • It's possible to know the CPU status of the PCD? (FAQ #100760)
  • Why does the OPC server crash? (FAQ #100571)
  • How to make systems symbols with HVC Fbox internal variables? (FAQ #100250)
  • How to import system symbols in OPC server? (FAQ #100247)
  • Compatibility of the S-Bus OPC-Server with PG5 1.2 and PG5 1.3 (FAQ #100240)
  • Driver not available for user when OPC server was started by OPC client (FAQ #100238)
  • No communication with PCD, data quality 'Bad, Comm Failure' (FAQ #100215)
  • Only one station of a S-Bus network has "good" communication (FAQ #100149)

Software (except PG5) / SCOMM

  • Can PG5 access more than 32 serial communication ports (ComPorts)? (FAQ #101339)
  • Information’s about TAPI modem settings on PG5. (FAQ #100891)
  • Memory leak from SCOMM on Windows XP (FAQ #100875)
  • SCommDll fails with strange status on multi core CPUs (FAQ #100674)
  • ScommDll doesn't work because of firewall software (FAQ #100323)
  • How to set up the SComm to connect a PCD over a server? (FAQ #100248)
  • Compatibility of the S-Bus OPC-Server with PG5 1.2 and PG5 1.3 (FAQ #100240)
  • Driver not available for user when OPC server was started by OPC client (FAQ #100238)
  • Is a driver for SBC S-Bus available? (FAQ #100179)

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download