Product Index PCD2 Wxxx: Analogue I/O W3xx: Analogue inputs

  • PCD2.W3xx

  • Analogue input modules

Documentation

System Catalogue : PCD2

Extract 26-215_A0140 System Catalogue : PCD2

Chapter:
Automation Stations - PCD2

ENG18c .pdf 3.00 MB Download
FRA18c .pdf 3.01 MB Download
GER18c .pdf 2.99 MB Download
ITA18c .pdf 3.00 MB Download

PCD2/3.W3x5 + PCD2/3.W6x5

Datasheet PP26-393 PCD2/3.W3x5 + PCD2/3.W6x5

Analogue I/O-modules with electrical isolation (galvanic separation of outputs to PCD, the channels themselves are not separated against each other)

ENG09 .pdf 0.45 MB Download
FRA09 .pdf 0.45 MB Download
GER09 .pdf 0.45 MB Download
ITA09 .pdf 0.47 MB Download
SPA09 .pdf 0.45 MB Download
SWE09 .pdf 0.47 MB Download

PCD2.W340 - Analogue inp., 8 channels, 12 bits

Datasheet 31-537 PCD2.W340 - Analogue inp., 8 channels, 12 bits

Measurement parameter:

- 0…10V
- 0…2.5V
- 0…20 mA
- Pt/Ni1000 (default)
- Pt1000: –50…+400°C
- Ni1000: –50…+200°C

ENG01 .pdf 1.31 MB Download
FRA01 .pdf 1.31 MB Download
GER01 .pdf 1.32 MB Download
ITA01 .pdf 1.33 MB Download
SPA01 .pdf 1.34 MB Download

PCD2/3.W380

Datasheet PP26-598 PCD2/3.W380

DE05 .pdf 0.65 MB Download
EN05 .pdf 0.64 MB Download
ES03 .pdf 0.53 MB Download

PCD2/3.W380

Manual 27-632 PCD2/3.W380

DE06 .pdf 1.39 MB Download
EN06 .pdf 1.37 MB Download
FR06 .pdf 1.42 MB Download
IT01 .pdf 0.68 MB Download

PCD1 | PCD2 Hardware

Manual 26-737 PCD1 | PCD2 Hardware

DE24 Archive .pdf 7.83 MB Download
EN24 Archive .pdf 8.29 MB Download
FR24 Archive .pdf 9.38 MB Download
IT24 Archive .pdf 7.53 MB Download

IO-Modules

Manual 27-600 IO-Modules

I/O modules for the series PCD1 | PCD2 and PCD3

ENG10 .pdf 18.74 MB Download
FRA10 .pdf 17.08 MB Download
GER10 .pdf 19.21 MB Download
ITA10 .pdf 18.80 MB Download

Systemcable and adapter

Manual 26-792 Systemcable and adapter

ENG07 .pdf 2.05 MB Download
FRA07 .pdf 3.47 MB Download
GER07 .pdf 3.44 MB Download
ITA07 .pdf 3.46 MB Download

Software / Tools

EPLAN Product Macros and DXF Files can be found here

Program example for W380, linearization of analogue values

Software Program example for W380, linearization of analogue values

- PG5 program example for the use of the linearization of the analogue values.

- Excel sheet with linearization tables for sensors NTC10k, NTC20k, LM235

PG5 program example .zip 0.83 MB Download
Excel sheet with linearization tables for sensors NTC10k, NTC20k, LM235 .zip 0.02 MB Download

Technical Reports

Cable layouts for maximum stability and accuracy

Technical Info Cable layouts for maximum stability and accuracy

DE Archive .pdf 0.08 MB Download
EN Archive .pdf 0.08 MB Download

Good to know

Requirements for the use of the PCD2/3.W380
- PCD firmware version 1.22.17 (or higher)
- Software PG5 version 2.1.300 (or higher)

Frequently asked questions

Why are my readings not stable? Most of the time a question of proper cable work. Refer to the technical report below if the fluctuations are small. If they are significant pay attention to the proper grounding of the modules. Connect each analogue module independently to a star point with a good ground connection. This star point must be connected with a wire as short and thick as possible to pin 22/23 (for PCD1) or pin 23/24 (for PCD2) respectively.

PCD2 / Wxxx

  • Why do measured input values for PCD2.W3x5 / PCD3.W3x5 cards "freeze" (FAQ #102043)
  • Why do the output of the PCD2/3.W6x5 not deliver stable signals? (FAQ #102014)
  • What is the signification of the I/O words of a PCD2/3.W525 module? (FAQ #101552)
  • Why do I get wrong values when reading a PCD2/3.W340 with media mapping? (FAQ #101416)
  • A PCD2.W3x0 conflicts with a PCD2.F2xx0 or a PCD2.R6000 on a PCD2.M5xxx (FAQ #101262)
  • What exactly is a PCD2/3.W721 and can I order it? (FAQ #101247)
  • Why do the outputs of PCD2/3.W525 not work? (FAQ #101204)
  • Replacement possibilities for PCD2.W5x0 and PCD3.W5x0 modules (FAQ #101151)
  • What is the IL code needed for the PCD2/3.W525 cards? (FAQ #101080)
  • Replacement possibilities for PCD2.W1xx modules (FAQ #101033)
  • Which module to use for Pt100 / Ni100 measurements? (FAQ #101032)
  • Connecting "special" temperature sensors to analogue modules. (FAQ #100926)
  • Why is the range of analogue (current-) input modules specified as 0(4)..20 mA? (FAQ #100675)
  • Analogue modules read wrong values while beeing online with PG5 (FAQ #100631)
  • Shall the terminal 16 of the PCD2/3.W745 be connected to ground? (FAQ #100604)
  • What is the reason for the error "underflow" of the PCDx.W745? (FAQ #100499)
  • Frozen PCD2/3.W3x5 and PCD2/3.W6x5 modules (FAQ #100475)
  • Sampling time of PCD2/3.W6x5 modules (FAQ #100395)

PCD2 / M5xxx

  • On a PCD2.M4560 or PCD3.M5560, why the measured PT100 temperature values are not correct if the PT100 sensors are connected to PCD2.W220Z18 or PCD3.W220Z18 modules? (FAQ #102052)
  • Why the PCD2.C1000 and the PCD2.C2000 with production date calendar week 20 to 36 of the year 2021 does not work well? (FAQ #102051)
  • Why do the output of the PCD2/3.W6x5 not deliver stable signals? (FAQ #102014)
  • Inputs of a W525 could be perturbed from an other input? (FAQ #102007)
  • What are the differences between the COSinus firmwares FW 1.24.67 and FW 1.26.31? (FAQ #101987)
  • MUKE error 100xxxxxH (FAQ #101933)
  • What are the differences between the COSinus firmwares FW 1.22.48 and FW 1.24.69? (FAQ #101921)
  • How many onboard I/O are available on a PCD2.M5x40? (FAQ #101907)
  • Can the PCD7.R610 SD card memory be used on any PCD device? (FAQ #101890)
  • It's possible to connect a Ethernet Port of a PCD directly to Power over Ethernet (PoE)? (FAQ #101847)
  • Why is there an offset to the current PCD time in the Trending timestamp of a Web project if the FW 1.20.nn is used? (FAQ #101834)
  • On PCD2.M5 and PCD3 CPU's without Ethernet port and equipped with the FW 1.20.25, it's not possible to communicate over the port 0 and 1. (FAQ #101823)
  • What are the differences between firmware 1.16.69 and COSinus FW 1.22.61? (FAQ #101820)
  • On a NT PCD the S-Bus slave gateway port doesn't communicate after programm restart of the gateway PCD! (FAQ #101802)
  • Why is the modem "MDLS144 onbit" no longer working on a new PCD? (FAQ #101718)
  • Why does the PCD no longer run due to "BNt FAIL AI00006"? (FAQ #101712)
  • Why does the user program no longer work correctly after a restore from flash? (FAQ #101680)
  • Why does the PCD7.F7500 does not work on the PCD2.M5540? (FAQ #101655)
  • Why has the PCD lost the program while updating the firmware to 1.16.xx? (FAQ #101625)
  • What are the differences between firmware 1.14.23 and 1.16.69? (FAQ #101624)
  • What for is the "Extension memory backup size" in the Device Configurator used? (FAQ #101623)
  • How does the "Backup user program to file system" on PCD3 and PCD2.M5 work? (FAQ #101622)
  • Important remark when updating the PCD firmware to 1.16.xx (FAQ #101587)
  • Important remark when updating the PCD firmware from 1.10.xx or 1.14.xx to 1.16.xx/1.20.xx (FAQ #101535)
  • Why is the USB communication to my PCD lost after a program download? (FAQ #101518)
  • What do parameters 'speed' and 'priority' mean which get displayed on the status page of the PCD? (FAQ #101513)
  • Which hardware revision of the PCD2.M5_ is needed for firmware 1.14.23? (FAQ #101490)
  • Why do I get IP communication errors from time to time on a PCD2.M554x? (FAQ #101473)
  • How to extend the amount of available Flags on a PCD? (FAQ #101447)
  • What are the reasons for a "Bus Error" on a PCD2.M5 or a PCD3? (FAQ #101418)
  • Why does the PCD2.R6000 not work if a PCD2.C2000 is used on the same system? (FAQ #101414)
  • Firmware dependencies for the "DB Access Library" (FAQ #101372)
  • Is the "full duplex" mode supported by the Ethernet ports of a PCD? (FAQ #101365)
  • Why are the inputs 8100 and 8101 continously "high" in my fupla file? (FAQ #101363)
  • Why does the PCD go into halt when using temporary data (TEQU)? (FAQ #101293)
  • Meaning of the error codes for DB backup to flash (FAQ #101284)
  • Why are the DBs not correctly restored after a "restore program from flash"? (FAQ #101279)
  • Is Modbus supported by Saia PCD®s? (FAQ #101270)
  • A PCD2.W3x0 conflicts with a PCD2.F2xx0 or a PCD2.R6000 on a PCD2.M5xxx (FAQ #101262)
  • If I do change the TCP/IP settings of the PCD2.M5 CPU with the eDisplay (PCD7.D3100E), when are the new TCP/IP settings are activated? (FAQ #101168)
  • Is parity mode working on all ports of PCD3 and PCD2.M5 CPU? (FAQ #101103)
  • Is it possible to use two different TCP/IP addresses for the two TCP/IP connectors of the PCD2.M5 CPU? (FAQ #101097)
  • Why do the onboard outputs on a PCD2.M5xxx not work? (FAQ #100944)
  • Why doesn't my CPU go in RUN after download, even if this download option has been activated? (FAQ #100942)
  • On the Profibus-DP or Profi-S-I/O master it isn't possible to read or write registers with address > 4095 from the slave (FAQ #100927)
  • What is the minimum distance between PCD2.Mxxx CPUs and PCD2.C1xx extension rack? (FAQ #100892)
  • How to dump the memory of a PCD (with Saia PCD® COSinus firmware)? (FAQ #100833)
  • RTS and CTS signs are crossed on Slot A#1 and A#2 (Hardware Version A and Prototypes) of the PCD2.M5540 (FAQ #100831)
  • Can I use the character mode with XON/XOFF protocol on NT-PCD's? (FAQ #100700)
  • Why does a PCD7.F120 not work when used on a PCD3 or a PCD2.M5? (FAQ #100646)
  • Is it possible to download an xx7 firmware to a classic PCD and invers? (FAQ #100557)
  • Why does the "Error 335:...Invalid register number" appear on build? (FAQ #100491)
  • New systems do not support the baudrates below 1200Baud (FAQ #100394)
  • MPI communication on the Profi-S-Net port of a PCD2.M480, PCD2.M5xxx or PCD3.Mxxxx (FAQ #100284)
  • PCD7.D7xx terminal works on PGU port of PCD2.M110 but not on PGU port of PCD2.M150! (FAQ #100188)
  • Why the LED's of the Profi-S-Link adapter (PCD8.K120) are not switched on? (FAQ #100177)

PCD2 / M1xx

  • On a PCD2.M4560 or PCD3.M5560, why the measured PT100 temperature values are not correct if the PT100 sensors are connected to PCD2.W220Z18 or PCD3.W220Z18 modules? (FAQ #102052)
  • Why do the output of the PCD2/3.W6x5 not deliver stable signals? (FAQ #102014)
  • Why is the modem "MDLS144 onbit" no longer working on a new PCD? (FAQ #101718)
  • Until when can a PCD2.M120 be reparied? (FAQ #101482)
  • Why do I get a "DUART HW ERROR" on PCD2.M150 after restart? (FAQ #101395)
  • Why does the IP communication not work with firmware 0F0? (FAQ #101384)
  • Why does my PCD1 no longer start (due to a "Text segment error") after downloading a project with PG5 2.0? (FAQ #101379)
  • Firmware dependencies for the "DB Access Library" (FAQ #101372)
  • Meaning of the error codes for DB backup to flash (FAQ #101284)
  • Is Modbus supported by Saia PCD®s? (FAQ #101270)
  • "Send SMS extended" FBox and PCD1.M1x0 and PCD2.M110/120 (FAQ #101163)
  • RAM chip types to be used as user memory on a PCD1.M1xx or PCD2.M1xx (FAQ #101100)
  • What is the minimum distance between PCD2.Mxxx CPUs and PCD2.C1xx extension rack? (FAQ #100892)
  • Is possible to use two TCP/IP modules on a PCD CPU? (FAQ #100785)
  • Firmware download on a PCD2.M150 (FAQ #100598)
  • Is it possible to download an xx7 firmware to a classic PCD and invers? (FAQ #100557)
  • Can I use the same GSD File for PCD2.M170 as for PCD4.M170 (FAQ #100412)
  • Functional limitation regarding the use of the modem library (FAQ #100392)
  • PCD2.M170 or PCS1: WEB Server works only if a WEB project is downloaded in the PCD! (FAQ #100380)
  • Which Flash chip to use for which usage? (FAQ #100309)
  • PCD2.M150F650: Cannot go online via TCP/IP (FAQ #100270)
  • What is the max. size of DBs/TEXTs in the extension memory of PCD2.M170/480 with a PCD7.R400 memory module? (FAQ #100266)
  • Software Watchdog mustn't be used with FW 0C1 on PCD2.M150! (FAQ #100218)
  • Firmware version for PCD7.F650 and PCD2.M480 (FAQ #100189)
  • PCD7.D7xx terminal works on PGU port of PCD2.M110 but not on PGU port of PCD2.M150! (FAQ #100188)
  • Corrupted Flash user memory makes writing HW settings or program impossible (FAQ #100146)
  • "COM O 255" for Watchdog on a system with PCD3.Cxxx might cause problems (FAQ #100101)

PCD2 / M48x

  • On a PCD2.M4560 or PCD3.M5560, why the measured PT100 temperature values are not correct if the PT100 sensors are connected to PCD2.W220Z18 or PCD3.W220Z18 modules? (FAQ #102052)
  • Why do the output of the PCD2/3.W6x5 not deliver stable signals? (FAQ #102014)
  • Can I use the PCD2.M480 as an IP Router for Ether-S-Bus communication or as an IP Firewall? (FAQ #101597)
  • Why does the S-Bus gateway no longer work after some time? (FAQ #101393)
  • Firmware dependencies for the "DB Access Library" (FAQ #101372)
  • Meaning of the error codes for DB backup to flash (FAQ #101284)
  • Is Modbus supported by Saia PCD®s? (FAQ #101270)
  • Why doesn't my CPU go in RUN after download, even if this download option has been activated? (FAQ #100942)
  • On the Profibus-DP or Profi-S-I/O master it isn't possible to read or write registers with address > 4095 from the slave (FAQ #100927)
  • What is the minimum distance between PCD2.Mxxx CPUs and PCD2.C1xx extension rack? (FAQ #100892)
  • Why are broadcast telegramms not working anymore on the PCD3 or PCD2.M480 (FAQ #100798)
  • Is possible to use two TCP/IP modules on a PCD CPU? (FAQ #100785)
  • Not possible to go on line a 2nd time over a PGU connection (on the port 0 D-Sub connector)! (FAQ #100761)
  • PCD2.M480 FW 025: Not possible to go on line when Webserver is connected! (FAQ #100652)
  • Why does a PCD7.F120 not work when used on a PCD3 or a PCD2.M5? (FAQ #100646)
  • Is it possible to download an xx7 firmware to a classic PCD and invers? (FAQ #100557)
  • Is it possible to use the S-Net MPI port as free RS 485 port on the PCD2.M480? (FAQ #100530)
  • Why does the "Error 335:...Invalid register number" appear on build? (FAQ #100491)
  • PCD2.M48x Real Time Clock (RTC) corruption (FAQ #100447)
  • New systems do not support the baudrates below 1200Baud (FAQ #100394)
  • S-Bus Slave on Port 3 doesn't work with FW 020 on the M480 (FAQ #100389)
  • HMI Editor and PCD3.M_ or PCD2.M480: Wrong characters are display instead of value with Format #####! (FAQ #100360)
  • Supported baudrates and protocols on a PCD2.M480 (FAQ #100355)
  • PCD2.M480: minimum firmware version for USB, Profi-S-Bus, Profi-S-IO, Multiple S-Bus PGU Ports (FAQ #100340)
  • Is the MPI communication starting without configuration on the M480? (FAQ #100327)
  • MPI communication on the Profi-S-Net port of a PCD2.M480, PCD2.M5xxx or PCD3.Mxxxx (FAQ #100284)
  • PCD2.M150F650: Cannot go online via TCP/IP (FAQ #100270)
  • What is the max. size of DBs/TEXTs in the extension memory of PCD2.M170/480 with a PCD7.R400 memory module? (FAQ #100266)
  • PCD2.M480: The communication doesn't work on the Master Gateway Port! (FAQ #100192)
  • Firmware version for PCD7.F650 and PCD2.M480 (FAQ #100189)
  • PCD7.D7xx terminal works on PGU port of PCD2.M110 but not on PGU port of PCD2.M150! (FAQ #100188)
  • PCD2.M480: SM1 (S-Bus Master Parity) on Port 1 is not supported! (FAQ #100186)
  • Why the LED's of the Profi-S-Link adapter (PCD8.K120) are not switched on? (FAQ #100177)
  • "COM O 255" for Watchdog on a system with PCD3.Cxxx might cause problems (FAQ #100101)

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download