Services   BIM (Building Information Model)   BIM for Electrical Energy Meters

  • BIM for Electrical Energy Meters

    The Term Building Information Modeling (BIM) describes a method of optimizing the planning, execution and management of buildings with the help of Software. All relevant building data is digitally collected, combined and networked. As a virtual building model, the building is also geometrically visualized (Computer Model). Building Information Modeling is used both in construction and construction planning (Architecture, engineering, building engineering) and in facility management.

Documentation

SBC S-Bus

BIM - ALD1D5FS00A2A00

Tutorial ALD1 - S-Bus BIM - ALD1D5FS00A2A00

Single-phase energy meters with integral serial S-Bus interface for direct measurement, 230 VAC - 50 Hz

Main features:

Single-phase energy meter, 230 VAC 50 Hz
- Direct measurement up to 32 A
- Display of active power, voltage and current
- S-Bus Interface to query the data
- Reactive power and cos? available through interface
- Up to 254 meter can be connected to the S-Bus Interface
- 7-digit display
- Lead seal possible with cap as accessory
- Accuracy class B according to EN50470-3,
  accuracy class 1 according to IEC62053-21

PDS - xlsx Archive .pdf 0.31 MB Download
Revit-file - .rfa - Revision: b Archive .zip 0.29 MB Download
CREO-export - .sat Archive .zip 0.01 MB Download
Step-file - .step Archive .zip 0.01 MB Download
Step-file - .stp Archive .zip 0.01 MB Download

BIM - ALD1D5FS00A3A00

Tutorial ALD1 - S-Bus BIM - ALD1D5FS00A3A00

Single-phase energy meters with integral serial S-Bus interface for direct measurement, 230 VAC - 50 Hz

Main features:

Single-phase energy meter, 230 VAC 50 Hz
- Direct measurement up to 32 A
- Display of active power, voltage and current
- S-Bus Interface to query the data
- Reactive power and cos? available through interface
- Up to 254 meter can be connected to the S-Bus Interface
- 7-digit display
- Lead seal possible with cap as accessory
- Accuracy class B according to EN50470-3,
  accuracy class 1 according to IEC62053-21
- according to MID directive

PDS - xlsx .pdf 0.31 MB Download
Revit-file - .rfa - Revision: b .zip 0.29 MB Download
CREO-export - .sat .zip 0.01 MB Download
Step-file - .step .zip 0.01 MB Download
Step-file - .stp .zip 0.01 MB Download

BIM - ALD1B5FS00A2A00 - two-way

Tutorial ALD1 - S-Bus BIM - ALD1B5FS00A2A00 - two-way

Single-phase energy meters with integral serial S-Bus interface for direct measurement, 230 VAC - 50 Hz

Main features:

- 1-phase energy meters, 230 VAC 50 Hz
- Direct metering to 32 A in both directions of current
- Display of the active power, voltage and current
- S-Bus interface used to query data
- Idle power and cos? available via the interface
- Up to 254 energy meters can be connected to a single S-Bus interface.
- 7-digit LCD display for energy supply and feeding back
- Can be sealed with a sealing cap as an accessory
- Accuracy class B according to EN50470-3,
  accuracy class 1 according to IEC62053-21

PDS - xlsx Archive .pdf 0.31 MB Download
Revit-file - .rfa - Revision: b Archive .zip 0.29 MB Download
CREO-export - .sat Archive .zip 0.01 MB Download
Step-file - .step Archive .zip 0.01 MB Download
Step-file - .stp Archive .zip 0.01 MB Download

BIM - ALD1B5FS00A3A00 - two-way

Tutorial ALD1 - S-Bus BIM - ALD1B5FS00A3A00 - two-way

Single-phase energy meters with integral serial S-Bus interface for direct measurement, 230 VAC - 50 Hz

Main features:

- 1-phase energy meters, 230 VAC 50 Hz
- Direct metering to 32 A in both directions of current
- Display of the active power, voltage and current
- S-Bus interface used to query data
- Idle power and cos? available via the interface
- Up to 254 energy meters can be connected to a single S-Bus interface.
- 7-digit LCD display for energy supply and feeding back
- Can be sealed with a sealing cap as an accessory
- Accuracy class B according to EN50470-3,
  accuracy class 1 according to IEC62053-21
- according to MID directive

PDS - xlsx .pdf 0.31 MB Download
Revit-file - .rfa - Revision: b .zip 0.59 MB Download
CREO-export - .sat .zip 0.01 MB Download
Step-file - .step .zip 0.01 MB Download
Step-file - .stp .zip 0.01 MB Download

BIM - ALE3D5FS10C2A00

Tutorial ALE3 - S-Bus BIM - ALE3D5FS10C2A00

Three-phase two-way energy meter with LC display and S-Bus interface

Main features:

- 3-phase energy meter, 3 × 230 / 400 VAC 50 Hz
- Direct measurement up to 65 A
- Display of active power, voltage and current for every phase
- display="" of="" active="" power="" for="" all="" phase<br="">- S-Bus Interface to query the data
- Reactive power for every and/or all Phase available through interface
- Up to 254 meter can be connected to the S-Bus Interface
- 7-digit display for 1 or 2 tariffs
- Lead seal possible with cap as accessory
- Accuracy class B in accordance with EN50470-3,
  Accuracy class 1 in accordance with IEC62053-21

PDS - xlsx Archive .pdf 0.31 MB Download
Revit-file - .rfa - Revision: a Archive .zip 0.40 MB Download
CREO-export - .sat Archive .zip 0.01 MB Download
Step-file - .step Archive .zip 0.01 MB Download
Step-file - .stp Archive .zip 0.01 MB Download

BIM - ALE3D5FS10C3A00

Tutorial ALE3 - S-Bus BIM - ALE3D5FS10C3A00

Three-phase two-way energy meter with LC display and S-Bus interface

Main features:

- 3-phase energy meter, 3 × 230 / 400 VAC 50 Hz
- Direct measurement up to 65 A
- Display of active power, voltage and current for every phase
- display="" of="" active="" power="" for="" all="" phase<br="">- S-Bus Interface to query the data
- Reactive power for every and/or all Phase available through interface
- Up to 254 meter can be connected to the S-Bus Interface
- 7-digit display for 1 or 2 tariffs
- Lead seal possible with cap as accessory
- Accuracy class B in accordance with EN50470-3,
  Accuracy class 1 in accordance with IEC62053-21
- according to MID directive

PDS - xlsx .pdf 0.31 MB Download
Revit-file - .rfa - Revision: b .zip 0.40 MB Download
CREO-export - .sat .zip 0.01 MB Download
Step-file - .step .zip 0.01 MB Download
Step-file - .stp .zip 0.01 MB Download

BIM - ALE3B5FS00C2A00 - two-way

Tutorial ALE3 - S-Bus BIM - ALE3B5FS00C2A00 - two-way

Three-phase two-way energy meter with LC display and S-Bus interface

Main features:

- 3-phase energy meter, 3 × 230 / 400 VAC 50 Hz
- Direct metering to 65 A in both directions of current
- Display of the active power, voltage and current per phase
- Display of the total active power
- S-bus interface used to query data
- Idle power per phase or total available via the interface
- Up to 254 energy meters can be connected to a single S-bus interface
- 7-digit LCD display for energy supply and feeding back
- Can be sealed and is provided with a sealing cap as an accessory
- Accuracy class B in accordance with EN50470-3,
  Accuracy class 1 in accordance with IEC62053-21

PDS - xlsx Archive .pdf 0.31 MB Download
Revit-file - .rfa - Revision: b Archive .zip 0.40 MB Download
CREO-export - .sat Archive .zip 0.01 MB Download
Step-file - .step Archive .zip 0.01 MB Download
Step-file - .stp Archive .zip 0.01 MB Download

BIM - ALE3B5FS00C3A00 - two-way

Tutorial ALE3 - S-Bus BIM - ALE3B5FS00C3A00 - two-way

Three-phase two-way energy meter with LC display and S-Bus interface

Main features:

- 3-phase energy meter, 3 × 230 / 400 VAC 50 Hz
- Direct metering to 65 A in both directions of current
- Display of the active power, voltage and current per phase
- Display of the total active power
- S-bus interface used to query data
- Idle power per phase or total available via the interface
- Up to 254 energy meters can be connected to a single S-bus interface
- 7-digit LCD display for energy supply and feeding back
- Can be sealed and is provided with a sealing cap as an accessory
- Accuracy class B in accordance with EN50470-3,
  Accuracy class 1 in accordance with IEC62053-21
- according to MID directive

PDS - xlsx .pdf 0.14 MB Download
Revit-file - .rfa - Revision: b .zip 0.40 MB Download
CREO-export - .sat .zip 0.01 MB Download
Step-file - .step .zip 0.01 MB Download
Step-file - .stp .zip 0.01 MB Download

BIM - AWD1D5WS00A2A00

Tutorial AWD1 - S-Bus BIM - AWD1D5WS00A2A00

Single-phase energy meter with LCD display
S-Bus interface, 5…500 A, 1 tariff
display of active power, voltage and current

PDS Archive .pdf 0.14 MB Download
.sat Archive .sat 0.07 MB Download
.rfa Archive .rfa 0.36 MB Download

BIM - AWC3D5WS00C2A00

Tutorial AWC3 - S-Bus BIM - AWC3D5WS00C2A00

Three-phase energy meter with LCD display
S-Bus interface, 1…300 A
1 A current transformer, 1 tariff
display of active power, voltage and current

PDS Archive .pdf 0.14 MB Download
.sat Archive .sat 0.04 MB Download
.rfa Archive .rfa 0.36 MB Download

BIM - AWD3D5WS00C2A00

Tutorial AWD3 - S-Bus BIM - AWD3D5WS00C2A00

Three-phase energy meter with LCD display
- SBC S-Bus interface, 5…1'500 A, 1 tariff
- display of active power, voltage and current
- Reactive power per phase or total, available via M-Bus interface

PDS - xlsx Archive .pdf 0.31 MB Download
Revit-file - .rfa - Revision: a Archive .zip 0.40 MB Download
CREO-export - .sat Archive .zip 0.01 MB Download
Step-file - .step Archive .zip 0.01 MB Download
Step-file - .stp Archive .zip 0.01 MB Download

BIM - AWD3D5WS00C3A00

Tutorial AWD3 - S-Bus BIM - AWD3D5WS00C3A00

Three-phase energy meter with LCD display
- SBC S-Bus interface, 5…1'500 A, 1 tariff
- display of active power, voltage and current
- Reactive power per phase or total, available via M-Bus interface
- according to MID directive

PDS - xlsx .pdf 0.31 MB Download
Revit-file - .rfa - Revision: a .zip 0.40 MB Download
CREO-export - .sat .zip 0.01 MB Download
Step-file - .step .zip 0.01 MB Download
Step-file - .stp .zip 0.01 MB Download

BIM - AWD3D5WS00D2A00 - High Current

Tutorial AWD3 - S-Bus BIM - AWD3D5WS00D2A00 - High Current

Three-phase energy meter with LCD display
- S-Bus interface, 1'000…6'000 A, 1 tariff
- display of active power, voltage and current
- Reactive power per phase or total, available via M-Bus interface

PDS - xlsx Archive .pdf 0.31 MB Download
Revit-file - .rfa - Revision: a Archive .zip 0.40 MB Download
CREO-export - .sat Archive .zip 0.01 MB Download
Step-file - .step Archive .zip 0.01 MB Download
Step-file - .stp Archive .zip 0.01 MB Download

BIM - AWD3B5WS00C2A00 - two-way

Tutorial AWD3 - S-Bus BIM - AWD3B5WS00C2A00 - two-way

Three-phase two-way energy meter with LCD display
S-Bus interface, 5…1'500 A
display of active power, voltage and current

PDS - xlsx Archive .pdf 0.31 MB Download
Revit-file - .rfa - Revision: b Archive .zip 0.40 MB Download
CREO-export - .sat Archive .zip 0.01 MB Download
Step-file - .step Archive .zip 0.01 MB Download
Step-file - .stp Archive .zip 0.01 MB Download

BIM - AWD3B5WS00C3A00 - two-way

Tutorial AWD3 - S-Bus BIM - AWD3B5WS00C3A00 - two-way

Three-phase two-way energy meter with LCD display
S-Bus interface, 5…1'500 A
display of active power, voltage and current
according to MID directive

PDS - xlsx .pdf 0.31 MB Download
Revit-file - .rfa - Revision: b .zip 0.40 MB Download
CREO-export - .sat .zip 0.01 MB Download
Step-file - .step .zip 0.01 MB Download
Step-file - .stp .zip 0.01 MB Download

M-Bus

BIM - ALD1D5FM00A2A00

Tutorial ALD1 - M-Bus BIM - ALD1D5FM00A2A00

Single-phase energy meter with LC display and M-Bus

Main features

- Single-phase energy meter, 230 VAC 50 Hz
- Direct measurement up to 32 A
- Display of active power, voltage and current
- M-Bus Interface to query the data
- Reactive power available through interface
- Up to 250 meter can be connected to the M-Bus Interface
- 7-digit display
- Lead seal possible with cap as accessory
- Accuracy class B according to EN50470-3,
  accuracy class 1 according to IEC62053-21

PDS - xlsx Archive .pdf 0.16 MB Download
Revit-file - .rfa - Revision: b Archive .zip 0.30 MB Download
CREO-export - .sat Archive .zip 0.01 MB Download
Step-file - .step Archive .zip 0.01 MB Download
Step-file - .stp Archive .zip 0.01 MB Download

BIM - ALD1D5FM00A3A00

Tutorial ALD1 - M-Bus BIM - ALD1D5FM00A3A00

Single-phase energy meter with LC display and M-Bus

Main features

- Single-phase energy meter, 230 VAC 50 Hz
- Direct measurement up to 32 A
- Display of active power, voltage and current
- M-Bus Interface to query the data
- Reactive power available through interface
- Up to 250 meter can be connected to the M-Bus Interface
- 7-digit display
- Lead seal possible with cap as accessory
- Accuracy class B according to EN50470-3,
  accuracy class 1 according to IEC62053-21
- according to MID directive

PDS - xlsx .xlsx 0.19 MB Download
Revit-file - .rfa - Revision: b .zip 0.30 MB Download
CREO-export - .sat .sat 0.07 MB Download
Step-file - .step .step 0.08 MB Download
Step-file - .stp .zip 0.01 MB Download

BIM - ALE3D5FM10C2A00

Tutorial ALE3 - M-Bus BIM - ALE3D5FM10C2A00

Three-phase energy meter with LCD display
- M-Bus interface, Imax = 65 A, 2 tariffs
- display of active power, voltage and current

PDS - xlsx Archive .pdf 0.16 MB Download
Revit-file - .rfa - Revision: b Archive .zip 0.40 MB Download
CREO-export - .sat Archive .zip 0.01 MB Download
Step-file - .step Archive .zip 0.01 MB Download
Step-file - .stp Archive .zip 0.01 MB Download

BIM - ALE3D5FM10C3A00

Tutorial ALE3 - M-Bus BIM - ALE3D5FM10C3A00

Three-phase energy meter with LCD display
- M-Bus interface, Imax = 65 A, 2 tariffs
- display of active power, voltage and current
- according to MID directive

PDS - xlsx .pdf 0.16 MB Download
Revit-file - .rfa - Revision: b .zip 0.40 MB Download
CREO-export - .sat .zip 0.01 MB Download
Step-file - .step .zip 0.01 MB Download
Step-file - .stp .zip 0.01 MB Download

BIM - ALE3B5FM00C3A00 - two-way

Tutorial ALE3 - M-Bus BIM - ALE3B5FM00C3A00 - two-way

Three-phase two-way energy meter with LCD display
M-Bus interface, Imax = 65 A
display of active power, voltage and current
according to MID directive

PDS - xlsx .pdf 0.16 MB Download
Revit-file - .rfa - Revision: b .zip 0.40 MB Download
CREO-export - .sat .zip 0.01 MB Download
Step-file - .step .zip 0.01 MB Download
Step-file - .stp .zip 0.01 MB Download

BIM - AWD3D5WM00C2A00

Tutorial AWD3 - M-Bus BIM - AWD3D5WM00C2A00

Three-phase energy meter with LCD display
- M-Bus interface, 5…1'500 A, 1 tariff
- display of active power, voltage and current
- Reactive power per phase or total, available via M-Bus interface

PDS - xlsx Archive .pdf 0.15 MB Download
Revit-file - .rfa - Revision: a Archive .zip 0.40 MB Download
CREO-export - .sat Archive .zip 0.01 MB Download
Step-file - .step Archive .zip 0.01 MB Download
Step-file - .stp Archive .zip 0.01 MB Download

BIM - AWD3D5WM00C3A00

Tutorial AWD3 - M-Bus BIM - AWD3D5WM00C3A00

Three-phase energy meter with LCD display
- M-Bus interface, 5…1'500 A, 1 tariff
- display of active power, voltage and current
- Reactive power per phase or total, available via M-Bus interface
- according to MID directive

PDS - xlsx .pdf 0.31 MB Download
Revit-file - .rfa - Revision: a .zip 0.40 MB Download
CREO-export - .sat .zip 0.01 MB Download
Step-file - .step .zip 0.01 MB Download
Step-file - .stp .zip 0.01 MB Download

Modbus

BIM - ALD1D5FD00A2A00

Tutorial ALD1 - Modus BIM - ALD1D5FD00A2A00

Single-phase energy meter with LC display and Modbus interface

Main features

- Operating voltage: 230 VAC 50 Hz
- Direct measurement up to 32 A
- Display of active power, voltage and current
- Modbus RTU Interface to query the data
- Reactive power and cos? available through interface
- Up to 247 meters can be connected to the Modbus Interface
- 7-digits display
- Lead seal possible with cap as accessory
- Accuracy class B according to EN50470-3,
  accuracy class 1 according to IEC62053-21

PDS - xlsx Archive .pdf 0.16 MB Download
Revit-file - .rfa - Revision: b Archive .zip 0.30 MB Download
CREO-export - .sat Archive .zip 0.01 MB Download
Step-file - .step Archive .zip 0.01 MB Download
Step-file - .stp Archive .zip 0.01 MB Download

BIM - ALD1D5FD00A3A00

Tutorial ALD1 - Modus BIM - ALD1D5FD00A3A00

Single-phase energy meter with LC display and Modbus interface

Main features

- Operating voltage: 230 VAC 50 Hz
- Direct measurement up to 32 A
- Display of active power, voltage and current
- Modbus RTU Interface to query the data
- Reactive power and cos? available through interface
- Up to 247 meters can be connected to the Modbus Interface
- 7-digits display
- Lead seal possible with cap as accessory
- Accuracy class B according to EN50470-3,
  accuracy class 1 according to IEC62053-21
- according to MID directive

PDS - xlsx .xlsx 0.19 MB Download
Revit-file - .rfa - Revision: b .zip 0.30 MB Download
CREO-export - .sat .sat 0.07 MB Download
Step-file - .step .step 0.08 MB Download
Step-file - .stp .zip 0.01 MB Download

BIM - ALD1D5FD00A3A44

Tutorial ALD1 - Modbus 8N1 BIM - ALD1D5FD00A3A44

Single-phase energy meter with LC display and Modbus interface

Main features

- Operating voltage: 230 VAC 50 Hz
- Direct measurement up to 32 A
- Display of active power, voltage and current
- Modbus RTU, parity 8N1,  Interface to query the data
- Reactive power and cos? available through interface
- Up to 247 meters can be connected to the Modbus Interface
- 7-digits display
- Lead seal possible with cap as accessory
- Accuracy class B according to EN50470-3,
  accuracy class 1 according to IEC62053-21
- according to MID directive

PDS - xlsx .xlsx 0.19 MB Download
Revit-file - .rfa - Revision: b .zip 0.30 MB Download
CREO-export - .sat .sat 0.07 MB Download
Step-file - .step .step 0.08 MB Download
Step-file - .stp .zip 0.01 MB Download

BIM - ALD1B5FD00A3A00 - two-way

Tutorial ALD1 - Modbus BIM - ALD1B5FD00A3A00 - two-way

Single-phase two-way energy meter with LC display and Modbus interface

Main features

- Operating voltage: 230 VAC 50 Hz
- Direct measurement up to 32 A
- Display of active power, voltage and current
- Modbus RTU Interface to query the data
- Reactive power and cosPhi available through interface
- Up to 247 meters can be connected to the Modbus Interface
- 7-digits display
- Lead seal possible with cap as accessory
- Accuracy class B according to EN50470-3,
  accuracy class 1 according to IEC62053-21
- according to MID directive

PDS-File .xlsx 0.19 MB Download
Revit-file - .rfa - Revision: b .zip 0.30 MB Download
CREO-export - .sat .sat 0.07 MB Download
Step-file - .step .step 0.08 MB Download
Step-file - .stp .zip 0.01 MB Download

BIM - ALE3D5FD10C2A00

Tutorial ALE3 - Modbus BIM - ALE3D5FD10C2A00

Three-phase energy meter with LCD display
- Modbus interface, Imax = 65 A, 2 tariffs
- display of active power, voltage and current

PDS - xlsx Archive .pdf 0.16 MB Download
Revit-file - .rfa - Revision: b Archive .zip 0.40 MB Download
CREO-export - .sat Archive .zip 0.01 MB Download
Step-file - .step Archive .zip 0.01 MB Download
Step-file - .stp Archive .zip 0.01 MB Download

BIM - ALE3D5FD10C3A00

Tutorial ALE3 - Modbus BIM - ALE3D5FD10C3A00

Three-phase energy meter with LCD display
- Modbus interface, Imax = 65 A, 2 tariffs
- display of active power, voltage and current
- according to MID directivee

PDS - xlsx .pdf 0.31 MB Download
Revit-file - .rfa - Revision: b .zip 0.40 MB Download
CREO-export - .sat .zip 0.01 MB Download
Step-file - .step .zip 0.01 MB Download
Step-file - .stp .zip 0.01 MB Download

BIM - ALE3D5FD10C3A44

Tutorial ALE3 - Modbus 8N1 BIM - ALE3D5FD10C3A44

Three-phase energy meter with LCD display
- Modbus interface, parity 8N1,- Imax = 65 A, 2 tariffs
- display of active power, voltage and current
- according to MID directive

PDS - xlsx .pdf 0.31 MB Download
Revit-file - .rfa - Revision: b .zip 0.40 MB Download
CREO-export - .sat .zip 0.01 MB Download
Step-file - .step .zip 0.01 MB Download
Step-file - .stp .zip 0.01 MB Download

BIM - ALE3B5FD00C3A00 - two-way

Tutorial ALE3 - Modbus BIM - ALE3B5FD00C3A00 - two-way

Three-phase two-way energy meter with LCD display
- Modbus interface, Imax = 65 A
- display of active power, voltage and current
- according to MID directive

PDS - xlsx .pdf 0.31 MB Download
Revit-file - .rfa - Revision: b .zip 0.40 MB Download
CREO-export - .sat .zip 0.01 MB Download
Step-file - .step .zip 0.01 MB Download
Step-file - .stp .zip 0.01 MB Download

BIM - AWD3D5WD00C2A00

Tutorial AWD3 - Modbus BIM - AWD3D5WD00C2A00

3-phase energy meter, 3 × 230 / 400 VAC 50 H
- Measurement through a current transformer up to 1500 A
- Display of active power, voltage and current for every phase
- Display of active power for all phases
- Modbus RTU Interface to query the data
- Reactive power for every and/or all Phases available through interface
- Up to 247 meters can be connected to the Modbus Interface
- 7-digits display
- Lead seal possible with cap as accessory
- Accuracy class B according to EN50470-3,
  accuracy class 1 according to IEC62053-21

PDS - xlsx Archive .pdf 0.16 MB Download
Revit-file - .rfa - Revision: a Archive .zip 0.40 MB Download
CREO-export - .sat Archive .zip 0.01 MB Download
Step-file - .step Archive .zip 0.01 MB Download
Step-file - .stp Archive .zip 0.01 MB Download

BIM - AWD3D5WD00C3A00

Tutorial AWD3 - Modbus BIM - AWD3D5WD00C3A00

3-phase energy meter, 3 × 230 / 400 VAC 50 H
- Measurement through a current transformer up to 1500 A
- Display of active power, voltage and current for every phase
- Display of active power for all phases
- Modbus RTU Interface to query the data
- Reactive power for every and/or all Phases available through interface
- Up to 247 meters can be connected to the Modbus Interface
- 7-digits display
- Lead seal possible with cap as accessory
- Accuracy class B according to EN50470-3,
  accuracy class 1 according to IEC62053-21
- according to MID directive

PDS - xlsx .pdf 0.31 MB Download
Revit-file - .rfa - Revision: a .zip 0.40 MB Download
CREO-export - .sat .zip 0.01 MB Download
Step-file - .step .zip 0.01 MB Download
Step-file - .stp .zip 0.01 MB Download

BIM - AWD3D5WD00C3A44

Tutorial AWD3 - Modbus 8N1 BIM - AWD3D5WD00C3A44

3-phase energy meter, 3 × 230 / 400 VAC 50 H
- Measurement through a current transformer up to 1500 A
- Display of active power, voltage and current for every phase - Display of active power for all phases
- Modbus RTU Interface to query the data
- Reactive power for every and/or all Phases available through interface
- Up to 247 meters can be connected to the Modbus Interface, parity 8N1
- 7-digits display
- Lead seal possible with cap as accessory
- Accuracy class B according to EN50470-3
  accuracy class 1 according to IEC62053-21
- according to MID directive

PDS - xlsx .pdf 0.31 MB Download
Revit-file - .rfa - Revision: a .zip 0.40 MB Download
CREO-export - .sat .zip 0.01 MB Download
Step-file - .step .zip 0.01 MB Download
Step-file - .stp .zip 0.01 MB Download

S0-interface

BIM - ALD1D5F10KA2A00

Tutorial ALD1 - S0-interface BIM - ALD1D5F10KA2A00

The S0 interface is a hardware interface for the transmission of measured values via pulses.

Main features:

- Single-phase energy meter, 230 VAC 50 Hz
- Direct measurement up to 32 A
- Display of active power
- 7-digit LC-Display with backlight
- Lead seal possible with cap as accessory
- Precision class B according to EN50470-3,
  1 according to IEC62053-21
- S0 output

PDS - xlsx Archive .xlsx 0.19 MB Download
Revit-file - .rfa - Revision: b Archive .zip 0.29 MB Download
CREO-export - .sat Archive .sat 0.07 MB Download
Step-file - .step Archive .step 0.08 MB Download
Step-file - .stp Archive .zip 0.01 MB Download

BIM - ALD1D5F10KA3A00

Tutorial ALD1 - S0-interface BIM - ALD1D5F10KA3A00

The S0 interface is a hardware interface for the transmission of measured values via pulses.

Main features:

- Single-phase energy meter, 230 VAC 50 Hz
- Direct measurement up to 32 A
- Display of active power
- 7-digit LC-Display with backlight
- Lead seal possible with cap as accessory
- Precision class B according to EN50470-3,
  1 according to IEC62053-21
- S0 output

- according to MID directive

PDS - xlsx .xlsx 0.19 MB Download
Revit-file - .rfa - Revision: b .zip 0.29 MB Download
CREO-export - .sat .sat 0.07 MB Download
Step-file - .step .zip 0.01 MB Download
Step-file - .stp .zip 0.01 MB Download

BIM - ALD1D5F10KB2A00

Tutorial ALD1 - S0-interface BIM - ALD1D5F10KB2A00

The S0 interface is a hardware interface for the transmission of measured values via pulses.

Main features:

- Single-phase energy meter, 230 VAC 50 Hz
- Direct measurement up to 32 A
- Display of active power, voltage and current
- 7-digit LC-Display with backlight
- Lead seal possible with cap as accessory
- Precision class B according to EN50470-3,
  1 according to IEC62053-21
- S0 output

PDS - xlsx Archive .xlsx 0.19 MB Download
Revit-file - .rfa - Revision: b Archive .zip 0.29 MB Download
CREO-export - .sat Archive .sat 0.07 MB Download
Step-file - .step Archive .zip 0.01 MB Download
Step-file - .stp Archive .zip 0.01 MB Download

BIM - ALD1D5F10KB3A00

Tutorial ALD1 - S0-interface BIM - ALD1D5F10KB3A00

The S0 interface is a hardware interface for the transmission of measured values via pulses.

Main features:

- Single-phase energy meter, 230 VAC 50 Hz
- Direct measurement up to 32 A
- Display of active power, voltage and current
- 7-digit LC-Display with backlight
- Lead seal possible with cap as accessory
- Precision class B according to EN50470-3,
  1 according to IEC62053-21
- S0 output

PDS - xlsx .xlsx 0.19 MB Download
Revit-file - .rfa - Revision: b .zip 0.29 MB Download
CREO-export - .sat .sat 0.07 MB Download
Step-file - .step .zip 0.01 MB Download
Step-file - .stp Archive .zip 0.01 MB Download

BIM - ALD1B5F10KA2A00 - two-way

Tutorial ALD1 - S0-interface BIM - ALD1B5F10KA2A00 - two-way

The S0 interface is a hardware interface for the transmission of measured values via pulses.

Main features:

- Single phase energy meter, 230 VAC 50 Hz
- Direct metering to 32 A in both directions of current
- Display of the active power, voltage and current
- S0-pulse-output; independent of the direction of current
- 7-digit LCD display for energy supply and feeding back
- Can be sealed with a sealing cap as an accessory
- Accuracy class B in accordance with EN50470-3,
  Accuracy class 1 in accordance with IEC62053-21

PDS - xlsx Archive .xlsx 0.19 MB Download
Revit-file - .rfa - Revision: b Archive .zip 0.30 MB Download
CREO-export - .sat Archive .zip 0.01 MB Download
Step-file - .step Archive .zip 0.01 MB Download
Step-file - .stp Archive .zip 0.01 MB Download

BIM - ALD1B5F10KA3A00 - two-way

Tutorial ALD1 - S0-interface BIM - ALD1B5F10KA3A00 - two-way

The S0 interface is a hardware interface for the transmission of measured values via pulses.

Main features:

- Single phase energy meter, 230 VAC 50 Hz
- Direct metering to 32 A in both directions of current
- Display of the active power, voltage and current
- S0-pulse-output; independent of the direction of current
- 7-digit LCD display for energy supply and feeding back
- Can be sealed with a sealing cap as an accessory
- Accuracy class B in accordance with EN50470-3,
  Accuracy class 1 in accordance with IEC62053-21

- according to MID directive

PDS-file - .xlsx .xlsx 0.19 MB Download
Revit-file - .rfa - Revision: b .zip 0.30 MB Download
CREO-export - .sat .sat 0.07 MB Download
Step-File - .step .step 0.08 MB Download
Step-file - .stp .zip 0.01 MB Download

BIM - ALE3D5F10KA2A00

Tutorial ALE3 - S0-interface BIM - ALE3D5F10KA2A00

Three-phase energy meter with LCD display
- S0 pulse output = 1'000 pulses/kWh
- Imax = 65 A, 1 tariff
- display of active power, voltage and current

PDS - xlsx Archive .pdf 0.31 MB Download
Revit-file - .rfa - Revision: b Archive .zip 0.40 MB Download
CREO-export - .sat Archive .zip 0.01 MB Download
Step-file - .step Archive .zip 0.01 MB Download
Step-file - .stp Archive .zip 0.01 MB Download

BIM - ALE3D5F10KA3A00

Tutorial ALE3 - S0-interface BIM - ALE3D5F10KA3A00

Three-phase energy meter with LCD display
- S0 pulse output = 1'000 pulses/kWh
- Imax = 65 A, 1 tariff
- display of active power, voltage and current
- according to MID directive

PDS - xlsx .pdf 0.31 MB Download
Revit-file - .rfa - Revision: b .zip 0.40 MB Download
CREO-export - .sat .zip 0.01 MB Download
Step-file - .step .zip 0.01 MB Download
Step-file - .stp .zip 0.01 MB Download

BIM - ALE3D5F10KB2A00

Tutorial ALE3 - S0-interface BIM - ALE3D5F10KB2A00

Three-phase energy meter with LCD display
- S0 pulse output = 1'000 pulses/kWh
- Imax = 65 A, 1 tariff

PDS - xlsx Archive .pdf 0.31 MB Download
Revit-file - .rfa - Revision: b Archive .zip 0.40 MB Download
CREO-export - .sat Archive .zip 0.01 MB Download
Step-file - .step Archive .zip 0.01 MB Download
Step-file - .stp Archive .zip 0.01 MB Download

BIM - ALE3D5F10KB3A00

Tutorial ALE3 - S0-interface BIM - ALE3D5F10KB3A00

Three-phase energy meter with LCD display
- S0 pulse output = 1'000 pulses/kWh
- Imax = 65 A, 1 tariff
- according to MID directivet

PDS - xlsx .pdf 0.31 MB Download
Revit-file - .rfa - Revision: b .zip 0.40 MB Download
CREO-export - .sat .zip 0.01 MB Download
Step-file - .step .zip 0.01 MB Download
Step-file - .stp .zip 0.01 MB Download

BIM - ALE3D5F11KC3A00

Tutorial ALE3 - S0-interface BIM - ALE3D5F11KC3A00

Three-phase energy meter with LCD display
- S0 pulse output = 1'000 pulses/kWh
- Imax = 65 A, 2 tariffs
- display of active power, voltage and current
- display without main power (backup)
- according to MID directive

PDS - xlsx .pdf 0.31 MB Download
Revit-file - .rfa - Revision: b .zip 0.40 MB Download
CREO-export - .sat .zip 0.01 MB Download
Step-file - .step .zip 0.01 MB Download
Step-file - .stp .zip 0.01 MB Download

BIM - ALE3B5F10KC2A00 - two-way

Tutorial ALE3 - S0-interface BIM - ALE3B5F10KC2A00 - two-way

Three-phase two-way energy meter with LCD display
- S0 pulse output = 1'000 pulses/kWh
- Imax = 65 A
- display of active power, voltage and current
- display without main power (backup)t

PDS - xlsx Archive .pdf 0.16 MB Download
Revit-file - .rfa - Revision: b Archive .zip 0.40 MB Download
CREO-export - .sat Archive .zip 0.01 MB Download
Step-file - .step Archive .zip 0.01 MB Download
Step-file - .stp Archive .zip 0.01 MB Download

BIM - ALE3B5F10KC3A00 - two-way

Tutorial ALE3 - S0-interface BIM - ALE3B5F10KC3A00 - two-way

Three-phase two-way energy meter with LCD display
- S0 pulse output = 1'000 pulses/kWh
- Imax = 65 A
- display of active power, voltage and current
- display without main power (backup)
- according to MID directive

PDS - xlsx .pdf 0.31 MB Download
Revit-file - .rfa - Revision: b .zip 0.40 MB Download
CREO-export - .sat .zip 0.01 MB Download
Step-file - .step .zip 0.01 MB Download
Step-file - .stp .zip 0.01 MB Download

BIM - AWD3D5W10MC2A00

Tutorial AWD3 - S0-interf. BIM - AWD3D5W10MC2A00

The S0 interface is a hardware interface for the transmission of measured values via pulses.

Main features:

3-phase energy meter, 3 × 230 / 400 VAC 50 Hz
- For CT measurement to 1500 A
- Indication of instantaneous power, voltage and current
- 7-digit display for 1 tariff
- Lead seal possible with cap as accessory
- S0 pulse output
- Precision class B according to EN50470-3,

PDS - xlsx Archive .pdf 0.31 MB Download
Revit-file - .rfa - Revision: a Archive .zip 0.40 MB Download
CREO-export - .sat Archive .zip 0.01 MB Download
Step-file - .step Archive .zip 0.01 MB Download
Step-file - .stp Archive .zip 0.01 MB Download

BIM - AWD3D5W10MC3A00

Tutorial AWD3 - S0-interf. BIM - AWD3D5W10MC3A00

The S0 interface is a hardware interface for the transmission of measured values via pulses.

Main features:

3-phase energy meter, 3 × 230 / 400 VAC 50 Hz
- For CT measurement to 1500 A
- Indication of instantaneous power, voltage and current
- 7-digit display for 1 tariff
- Lead seal possible with cap as accessory
- S0 pulse output
- Precision class B according to EN50470-3,
  Precision class 1 according to IEC62053-21

PDS - xlsx .pdf 0.31 MB Download
Revit-file - .rfa - Revision: a .zip 0.40 MB Download
CREO-export - .sat .zip 0.01 MB Download
Step-file - .step .zip 0.01 MB Download
Step-file - .stp .zip 0.01 MB Download

BIM - AWD3D5W10ND3A00

Tutorial AWD3 - S0-interf. BIM - AWD3D5W10ND3A00

The S0 interface is a hardware interface for the transmission of measured values via pulses.

Main features:

3-phase energy meter, 3 × 230 / 400 VAC 50 Hz
- For CT measurement High Current 1000…6000 A A
- Indication of instantaneous power, voltage and current
- 7-digit display for 1 tariff
- Lead seal possible with cap as accessory
- S0 pulse output
- Precision class B according to EN50470-3,
  Precision class 1 according to IEC62053-21

PDS - xlsx .pdf 0.31 MB Download
Revit-file - .rfa - Revision: a .zip 0.40 MB Download
CREO-export - .sat .zip 0.01 MB Download
Step-file - .step .zip 0.01 MB Download
Step-file - .stp .zip 0.01 MB Download

BIM - AWD3B5W10MC2A00 - two-way

Tutorial AWD3 - S0-interf. BIM - AWD3B5W10MC2A00 - two-way

The S0 interface is a hardware interface for the transmission of measured values via pulses.

Main features:

3-phase energy meter, 3 × 230 / 400 VAC 50 Hz
- For CT measurement to 1500 A in both directions of current
- Indication of instantaneous power, voltage and current
- 7-digit display for 1 tariff
- Lead seal possible with cap as accessory
- S0 pulse output
- Precision class B according to EN50470-3,
  Precision class 1 according to IEC62053-21

PDS - xlsx Archive .pdf 0.31 MB Download
Revit-file - .rfa - Revision: b Archive .zip 0.40 MB Download
CREO-export - .sat Archive .zip 0.01 MB Download
Step-file - .step Archive .zip 0.01 MB Download
Step-file - .stp Archive .zip 0.01 MB Download

BIM - AWD3B5W10MC3A00 - two-way

Tutorial AWD3 - S0-interf. BIM - AWD3B5W10MC3A00 - two-way

The S0 interface is a hardware interface for the transmission of measured values via pulses.

Main features:

3-phase energy meter, 3 × 230 / 400 VAC 50 Hz
- For CT measurement to 1500 A in both directions of current
- Indication of instantaneous power, voltage and current
- 7-digit display for 1 tariff
- Lead seal possible with cap as accessory
- S0 pulse output
- Precision class B according to EN50470-3,
  Precision class 1 according to IEC62053-21
- according to MID directive

PDS - xlsx .pdf 0.31 MB Download
Revit-file - .rfa - Revision: a .zip 0.40 MB Download
CREO-export - .sat .zip 0.01 MB Download
Step-file - .step .zip 0.01 MB Download
Step-file - .stp .zip 0.01 MB Download

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download