................................................................................................................ 01.02.2016 Stephan Hintze Version 2.8.160 Service - Family Init - New FBox InitLib Reduced - For "Light controller" no XOB, WD and FBox IO access ................................................................................................................ 17.12.2015 Stephan Hintze Version 2.8.159 Service - Family BACnet - Device > Check for PV=PcdInRef only after delay to reduce COV events ................................................................................................................ 13.08.2015 Stephan Hintze Version 2.8.158 Service - Family SetPoint - Integer / Integer (MV) > Language FR > the predefined symbol "Flag" was wrong, changed into "Value" ................................................................................................................ 27.04.2015 Stephan Hintze Version 2.8.157 Service - Family Systems - Redundancy > manual testing was forcing problems if "Diff" was selected, if "En2" without "En1" > incorrect behaviour. ................................................................................................................ 17.04.2015 Stephan Hintze Version 2.8.156 Service - Family Init - ABS > with BACnet functionality was not properly working ................................................................................................................ 13.04.2015 Stephan Hintze Version 2.8.155 Service - Family Control - Motor2 > with BACnet Input "En" was not mandatory > now mandatory - Family Control - Motor3 > with BACnet Input "En" was not mandatory > now mandatory ................................................................................................................ 09.03.2015 Stephan Hintze Version 2.8.154 Service - Parameter "Buffer size" limitation 10...10,000 - Parameter "Buffer size" throws error during build if less than 10 ................................................................................................................ 07.11.2014 Stephan Hintze Version 2.8.153 Service ................................................................................................................ 07.11.2014 Stephan Hintze Version 2.8.152 Service - Freigabe / Redundanz > Vorwahl "Aus" war 0, wg. BACnet Multistate nach 5 verschoben ................................................................................................................ 17.10.2014 Stephan Hintze Version 2.8.152 Service Family Analog - Counter : Residual was not updated in PV due to wrong jump (also in 2.6 correction) ................................................................................................................ 14.10.2014 Stephan Hintze Version 2.8.151 Service Family Alarming - Motor 2 speed : If BACnet enabled and e.g. ManSwitch not selected > copy from PcdInRef to PV was missing - Motor 3 speed : If BACnet enabled and e.g. ManSwitch not selected > copy from PcdInRef to PV was missing ................................................................................................................ 30.09.2014 Stephan Hintze Version 2.8.150 Service - All FBox with BACnet NC : limits set from -1 to 4194303 (before 4194302) ................................................................................................................ 16.07.2014 Stephan Hintze Version 2.8.149 Service - FBox Redundancy : Text list contained 0=daily (element disabled) and 8=daily (element enabled) Fupla was displaying an error if daily (8) was selected, element 0 removed ................................................................................................................ 07.04.2014 Stephan Hintze Version 2.8.148 - Family Analog : FBox Sensor : Timedelay was not working identically like BACnet when limits have changed ................................................................................................................ 20.03.2014 Stephan Hintze Version 2.8.147 - FBoxBuilder : Options Detailed Adjust Help / Start Help compiler in project settings modified ................................................................................................................ 04.03.2014 Stephan Hintze Version 2.8.146 - Family Controls : FBox Motor 2/Motor 3 : when BACnet stops FBox output have been reset ................................................................................................................ 04.02.2014 Stephan Hintze Version 2.8.145 - Family BACnet : FBox Device : Default delay feedback modified from 5 to 60 seconds, max. value 180 ................................................................................................................ 28.11.13 Stephan Hintze Version 2.8.143 - Family Controls : FBox Pump : Constante vor ABS changed from 3 to 2 > Display Error Text ................................................................................................................ 15.11.13 Stephan Hintze Version 2.8.143 - Family Systems : FBox Heating Circuit : Limit for the calculated setpoint increased from 100,0 to 150,0 °C from FBox Version 2.5.001 ................................................................................................................ 12.11.13 Stephan Hintze Version 2.8.142 - Family Systems : FBox Time Holiday : Correction On Date, is not working every Day now ................................................................................................................ 06.11.13 Stephan Hintze Version 2.8.141 - Family Analogue Values : FBox Sensor : BACnet property COV-increment now writable - Family Analogue Values : FBox IntegerMV : symbol mapping corrected "Symbol" > to "in_Value" ................................................................................................................ 29.10.13 Stephan Hintze Version 2.8.140 - Family Analogue Values : FBox Sensor : modified Alarm Limit beahviour of the Fbox to be synchron with Alarm handling in BACnet ................................................................................................................ 17.10.13 Stephan Hintze Version 2.8.139 - Family BACnet : FBox Trendlog : FR/IT/EN > Text "M1" was wrong (FileSystem) - Family BACnet : FBox Device : Default text = Init text - Family BACnet : FBox Trendlog : Default text = Init text - Family BACnet : FBox NC : Default text = Init text - Family BACnet : FBox Properties : Default text = Init text ................................................................................................................ 16.10.13 Stephan Hintze Version 2.8.138 - Family Controller : FR description controlelr chaining corrected in help - Family BACnet : FBox Device : FR Help ................................................................................................................ 04.10.13 Stephan Hintze Version 2.8.137 - Family Controller : FBox Cooler : If Dehumidification was active and the Cooler was locked via input when switching from Dehumidification back to normal all controller bits were set to zero and no controller was active--> corrected - Versionen 2.8.135/136 : Language corrections FR ................................................................................................................ 01.10.13 Stephan Hintze Version 2.8.134 - Language corrections FR ................................................................................................................ 17.09.13 Stephan Hintze Version 2.8.133 - Family Controller : Picture for Controlelr chaining added in help ................................................................................................................ 12.08.13 Stephan Hintze Version 2.8.132 - FBox BACnet Device : StartDelay was not correctly excecuted --> corrected ................................................................................................................ 12.08.13 Stephan Hintze Version 2.8.131 - FBox Master Cascade : Coldstart value was not scaled, wrong signal at first PID --> corrected ................................................................................................................ 06.08.13 Stephan Hintze Version 2.8.130 - FBox Time Holiday : On/Off Date can now be identical if On Time is before Off Time ................................................................................................................ 05.08.13 Stephan Hintze Version 2.8.128 - Scheduler FBox Binary/Analog/Multistate Help DE/EN - Corrections for Texts in $Report/$Warning/$Fatal DE to EN ................................................................................................................ 15.07.13 Stephan Hintze Version 2.8.128 - Scheduler FBoxes Binary/Analog/Multistate added ................................................................................................................ 11.07.13 Stephan Hintze Version 2.8.126 - NL language changes ................................................................................................................ 01.07.13 Stephan Hintze Version 2.8.121 - Scheduler FBox added new Properties ................................................................................................................ 28.06.13 Stephan Hintze Version 2.8.120 - PI Algorythmus optimized, now almost equal to HVAC PI - New BACnet Device FBox - Times for monitoring adjustable, PCS for Monitoring Objekt, Display PcdInRef und PV - New Scheduler FBoxes ................................................................................................................ 17.06.13 Stephan Hintze Version 2.8.119 - FBoxen Heat recovery: If Ala was active Signal was not depending on "-" or "+" Controller always gave Signal 0/100/0/100... , now always 0 ................................................................................................................ 14.06.13 Stephan Hintze Version 2.8.117 - FBox Frost Air Heater : If BACnet was active the delay was not working correctly (Timing FBox/BACnet) - corrected - EN : Some text corrections