Why is a Westermo TD-35 not working with other baudrates than 9600?

FAQ #100406

There is a problem with the Westermo-Modem TD-35 when using other baudrates than 9600. Westermo will correct it.

Problem
When using a Westermo TD-35 with a PCD2 / 3 / 4 , connection with full protocol (eg PG5) can only be established at 9600 bps. Selecting any other baud rate causes the modem to answer but no connection can be established & PG5 subsequently hangs-up the line. This appears to be the case regardless of which PCD communication port the modem is connected to.

 

Reason
The problem is due to the modem.

 

Solution

At the moment this Westermo Modem works only properly at 9600 bps.

Categories

PG5 2.0 / Modem

Last update: 29.05.2015 11:47

First release: 10.08.2005 07:03

Views: 984

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download