Connecting an external modem to the PCD3

FAQ #100843

How is the wiring for an external modem like Q.M716-KS1, Q.T726-RS1 or Q.G736-AS2?

 

PCD3.M5xxx or PCD3.M6xxx on PGU Port 0

If the modem is connected to the PGU Port 0, a straight cable as from PC to modem can be used. In the Hardware Settings, the "Full RS 232 handshaking on port 0" has to be activated when using the modem for program download.

PGU Port 0           Modem D-Sub 9-pol

Pin   Signal          Pin   Signal
1      DCD --------- 1      DCD   
2      RXD --------- 2      RXD
3      TXD --------- 3      TXD
4      DTR --------- 4      DTR
5      GND --------- 5      GND
6      DSR --------- 6      DSR
7      RTS --------- 7      RTS
8      CTS --------- 8      CTS
9      n.c

PCD3.Mxxx on PCD3.F121 Port 1

PCD3.F121           Modem D-Sub 9-pol

Pin   Signal          Pin   Signal
0      GND  
1      TXD --------- 3      TXD
2      RXD --------- 2      RXD
3      RTS --------- 7      RTS
4      CTS --------- 8      CTS
5      GND --------- 5      GND
6      DTR --------- 4      DTR
7      DSR --------- 6      DSR
8      COM
9      DCD --------- 1      DCD

 

Categories

PG5 2.0 / Modem

Last update: 22.05.2015 11:45

First release: 13.12.2007 11:23

Views: 2706

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download