What EPROM burner is recommended to create firmware chips for PCD's?

FAQ #100256

 

We have made good experiences with the GALEP 4, for PCD1 FW together with the adaptor 210841. The local dealer for Switzerland is www.redacom.ch.

Order numbers for empty firmware chips:

PCD1.M1x0: 1x ASN 4 502 7178 (OTP27C4002), one time programmable
PCD1.M137: 1x ASN 4 502 7178 (OTP27C4002), one time programmable
PCD2.M110/M120: 2x ASN 4 502 7126 0 (27C1001-10, EPROM)
PCD2.M127: can be downloaded, refer to the product page on
www.sbc-support.ch
PCD2.M150: 2x ASN 4 502 7341 0 (49F040 ,Flash-EPROM)
PCD2.M157: can be downloaded, refer to the product page on
www.sbc-support.ch 
PCD2.M170: chip soldered on the main board, the FW can be downloaded with PG5 *
PCD2.M177: can be downloaded, refer to the product page on
www.sbc-support.ch
PCD2.M480: chip soldered on the main board, the FW can be downloaded with PG5 *
PCD2.M487: can be downloaded, refer to the product page on
www.sbc-support.ch
PCD3.Mxxxx: chip soldered on the main board, the FW can be downloaded with PG5 *

* Procedure to downlaod a firmware:
1) get the appropriate file from product page on the supportsite
www.sbc-support.ch
2) open PG5 and go to the online-configurator; go offline
3) open the menu tools, download firmware
4) browse for the firmware file and start the download
5) load the HW configuration and the user program

 

Categories

PCD1 / _Firmware Classic

PCD2 / _Firmware Classic

PCD3 / _Firmware Classic

PCD4 / _Firmware

PCD6 / _Firmware

Miscellaneous

Last update: 31.05.2015 07:35

First release: 16.11.2004 10:22

Views: 16164

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download