What does the error message "Symbol not evaluated" mean?

FAQ #101520

There is a error in the assembler when symbol address used for example a symbol name as address for example:

PI_volet_chauf R 1117 [17]

Param2_PID_volet_chauf R PI_volet_chauf+1

 

 

Solution
This problem is solved with patch 1 for PG5 2.0.150 installation. Please install this or a later patch which is available on the support site.

 

Categories

PG5 2.0 / Project Manager

Last update: 31.05.2015 07:31

First release: 25.10.2010 08:28

Views: 5189

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download