Supported baudrates and protocols on a PCD2.M480

FAQ #100355

The serial ports of the PCD2.M480 does allow to communicate up to 115 kB/s.

 

The PCD2.M480 does support the following baudrates:

Serial communication (Serial-S-Bus, Mode C)

   Baud rate (kB/s)
PCD2
Socket
Module
1200
2400
4800
9600
19200
38400
57600
76800
115200
Port #
0
On-board
X
X
X
X
X
X
X
X
X
1APCD7.F1xx

X

X

X

X

X

X

    
1
A
PCD7.F121
X
X
X
X
X
X
X
X
X
2
B1
PCD2.F5xx
X
X
X
X
X
X
3
B1
PCD2.F5xx
X
X
X
X
X
X
4
B2
PCD2.F5xx
X
X
X
X
X
X
5
B2
PCD2.F5xx
X
X
X
X
X
X
6
On-board
X
X
X
X
X
X
X
X
X


Restrictions:

  • For the ports 2,3  and 4,5 following combination of baud rates are not allowed on the same  PCD2.F5xx:
    19,2 kBaud and 38,4 kBaud
  • On the port 1 it’s not possible to use the S-Bus party Master mode.
  • Mode D is not supported.

Profibus

   Supported baudrates Supported protocols
PCD2
Socket
Module
93,75 kB/s
187,5 kB/s
500 kB/s
1,5 MB/s
3 MB/s
6 MB/s
12 MB/s
Profi-S-Bus
Profi-S-IO Master or Slave
Profibus-DP Master
Profibus-DP Slave
Port #
8
B2
PCD7.F750
X
X
X
X
X
X
X
X
X
9
B1
PCD7.F750
X
X
X
X
X
X
X
X
X
10
On-board
X
X
X
X
X
X
X


Remark
:
Multi protocol on the same port is supported.
Example:
On the port 10 it’s possible to act at the same time as Profi-S-Bus Master and Slave, Profi-S-IO (Master or Slave) or Profibus-DP Slave.

Restriction:

If the port 10 is used as Profi-S-IO Master, then it’s not possible to act at the same time as Profi-S-IO Slave or Profbius-DP Slave on the port 10.

Ethernet TCP/IP

   Baudrate
PCD2
Socket
Module
10MB
100MB
Port #
8
B2
PCD7.F650
X
X
9
B1
PCD7.F650
X
X


Remark
:
Multi protocol on the same port is supported.
Example: On the port 8 it’s possible to act at the same time as Ether-S-Bus Master and as Ether-S-Bus Slave

Categories

PG5 2.0 / Profibus DP

Communication / Ether-S-Bus

PG5 2.0 / Profi-S-Bus

PG5 2.0 / Serial-S-Bus

PG5 2.0 / Profi-S-I/O

PCD2 / M48x

Last update: 31.05.2015 16:43

First release: 02.05.2005 14:39

Views: 14478

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download