Is possible to use two TCP/IP modules on a PCD CPU?

FAQ #100785

Yes, the PCD2.M480 is able to handle two TCP/IP (PCD7.F655) modules.

 

If there is the need to have two independent TCP/IP modules on one PCD, then you have to use the PCD2.M480 CPU. On the PCD2.M480 it is possible to install two PCD7.F655, one on the emplacement B1 and one on the emplacement B2.


The PCD2.M480 does support the routing mechanism of TCP/IP request between the two cards only for the direction:
TCP/IP card on emplacement B1 to TCP/IP card on emplacement B2.

 

Categories

PCD7 / Fxxx

Communication / Ether-S-Bus

PCD2 / M1xx

PCD2 / M48x

Last update: 21.05.2015 11:09

First release: 16.10.2007 08:45

Views: 6792

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download