What exactly is a PCD2/3.W721 and can I order it?

FAQ #101247

When the weighing modules first have been introduced it was possible to order a weighing module that was already calibrated for a specific weighing cell. This module was a PCD2.W721 (or PCD3.W721).

 

 

After gathering some experiences it turned out that such a calibration of a module is only asked very seldom. Beside of this fact it showed that better calibration results can be achieved when directly calibrating the module in the target system.

Due to these facts it has been decided to remove the PCD2/3.W721 from the price list. It is no longer possible ordering this module (instead, use a PCD2/3.W720).

 

Categories

PCD2 / Wxxx

PCD3 / Wxxx

Last update: 07.04.2015 05:26

First release: 29.06.2009 11:09

Views: 9006

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download