Important: Cet article est une traduction automatique réalisée par un logiciel. Le texte original peut être lu ici. SBC fournit ces informations sans garantie de l’exactitude ou de la fonctionnalité et n’assume pas la responsabilité de la traduction.

Prise en charge baudrates et protocoles sur un PCD2.M480

FAQ #100355

Les ports série de le PCD2.M480 permet de communiquer jusqu'à 115 kB/s.

The PCD2.M480 does support the following baudrates:

Serial communication (Serial-S-Bus, Mode C)

			Baud rate (kB/s)
	PCD2 Socket	Module	1200	2400	4800	9600	19200	38400	57600	76800	115200
Port #
0	On-board		X	X	X	X	X	X	X	X	X
1	A	PCD7.F1xx	X	X	X	X	X	X
1	A	PCD7.F121	X	X	X	X	X	X	X	X	X
2	B1	PCD2.F5xx	X	X	X	X	X	X
3	B1	PCD2.F5xx	X	X	X	X	X	X
4	B2	PCD2.F5xx	X	X	X	X	X	X
5	B2	PCD2.F5xx	X	X	X	X	X	X
6	On-board		X	X	X	X	X	X	X	X	X

Restrictions:

For the ports 2,3 and 4,5 following combination of baud rates are not allowed on the same PCD2.F5xx:
19,2 kBaud and 38,4 kBaud
On the port 1 it’s not possible to use the S-Bus party Master mode.
Mode D is not supported.

Profibus

Supported baudrates

Supported protocols

PCD2
Socket

Module

93,75 kB/s

187,5 kB/s

500 kB/s

1,5 MB/s

3 MB/s

6 MB/s

12 MB/s

Profi-S-Bus

Profi-S-IO Master or Slave

Profibus-DP Master

Profibus-DP Slave

Port #

PCD7.F750

On-board

Remark:
Multi protocol on the same port is supported.
Example:
On the port 10 it’s possible to act at the same time as Profi-S-Bus Master and Slave, Profi-S-IO (Master or Slave) or Profibus-DP Slave.

Restriction:

If the port 10 is used as Profi-S-IO Master, then it’s not possible to act at the same time as Profi-S-IO Slave or Profbius-DP Slave on the port 10.

Ethernet TCP/IP

			Baudrate
	PCD2 Socket	Module	10MB	100MB
Port #
8	B2	PCD7.F650	X	X
9	B1	PCD7.F650	X	X

Remark:
Multi protocol on the same port is supported.
Example: On the port 8 it’s possible to act at the same time as Ether-S-Bus Master and as Ether-S-Bus Slave

Related FAQs:

Prise en charge baudrates et protocoles sur un PCD2.M480

FAQ #100355

Categories