MUKE error 100xxxxxH

FAQ #101933

This error is in fact a kernel error produced when different systems of the PCD are called simultaneously and get pointed on a invalid address. As the result the PCD goes in halt unless the software watchdog has been programme!                 

According to our experience the error happens very very rarely and most probably won't happen again!

In order to understand what happen a diagnostic file give us some more information but a memory dump is indeed needed to analyse in order to correct it in firmware!

Remark:

If the firmware version used is old we would advise to update the PCD with a newer FW!

Categories

PCD3 / _Firmware Classic

PCD2 / M5xxx

Last update: 30.05.2015 07:15

First release: 02.04.2015 10:03

Views: 10

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download