The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

  • PCD0.xxxx

  • Profibus DP remote I/O's (obsolete, replaced by PCD3.T760)

PCD0-RIOs for Profibus

Manual 26-766 PCD0-RIOs for Profibus

DE02 Archive .pdf 3.31 MB Download
EN02 Archive .pdf 3.29 MB Download

GSD Files

Software GSD Files

GSD files for SBC slaves

EN .zip 0.66 MB Download

PCD0

  • Do I always have to configure a bus coupler diagnostic module on the PCD0.T770 RIO module? (FAQ #100130)

PG5 2.0 / Profibus DP

  • How to read the diagnostic information of a PCD3.W745 on a PCD3.T760? (FAQ #101697)
  • Why does my PCD7.F7500 not work on my PCD2.M5540? (FAQ #101655)
  • What is the maximum of exchanged data over Profibus DP on a PCD? (FAQ #101642)
  • What is the signification of the I/O words of a PCD2/3.W525 module? (FAQ #101552)
  • Meaning of the LEDs on Profibus DP Master modules and CPUs (FAQ #101271)
  • Does the DP/DP coupler 6ES7 from Siemens work with a PCD system? (FAQ #101253)
  • On the Profibus-DP or Profi-S-IO master, what is the signification of the diagnostic flag SLAVE_ERR? (FAQ #101173)
  • How to configure the Saia PCD® as DP Master, if the Slave is a Siemens CP 342-5? (FAQ #101124)
  • DP/Belimo gateway display error message after program download to the PCD (FAQ #100976)
  • On the Profibus-DP or Profi-S-I/O master it isn't possible to read or write registers with address > 4095 from the slave (FAQ #100927)
  • Too strong limitation imposed by S-Net Configurator (FAQ #100717)
  • Why is the communication between a SBC Master and a Siemens Slave not working (FAQ #100651)
  • change baudrate with SNet configurator (FAQ #100514)
  • Are the modules PCD3.W800, PCD3.A810 and PCD3.A860 supported by the PCD3.T760? (FAQ #100504)
  • Negative values from PCD3.T760 are not interpreted correctly on the PCD (FAQ #100466)
  • Can I use the same GSD File for PCD2.M170 as for PCD4.M170 (FAQ #100412)
  • What connector and cable typ should be used? (FAQ #100369)
  • Supported baudrates and protocols on a PCD2.M480 (FAQ #100355)
  • Incompatibility of old FW and new Profibus DP configurator (FAQ #100319)
  • What Profibus Analyzer should be bought? (FAQ #100298)
  • Error PCD7.F750 " no Diagnostic refresh" (FAQ #100271)
  • How to configure a PCD3.W745 on a PCD3.T760? (FAQ #100214)
  • How to wire a Profibus DP network correctly to a PCD? (FAQ #100164)
  • It's possible to add new groups in to the PG5 Profibus-DP configurator device list? (FAQ #100159)
  • It's possible to use my old GSD data's in new PG5 projects? (FAQ #100157)
  • RS-485 wiring information (FAQ #100152)

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download