The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

  • PCD2.M110

  • Central processing units

Documentation

PCD1 | PCD2 Hardware

Manual 26-737 PCD1 | PCD2 Hardware

DE24 Archive .pdf 7.83 MB Download
EN24 Archive .pdf 8.29 MB Download
FR24 Archive .pdf 9.38 MB Download
IT24 Archive .pdf 7.53 MB Download

IO-Modules

Manual 27-600 IO-Modules

I/O modules for the series PCD1 | PCD2 and PCD3

ENG08 .pdf 13.08 MB Download
FRA08 .pdf 16.45 MB Download
GER08 .pdf 15.48 MB Download
ITA08 .pdf 12.56 MB Download

Firmware

Hex-files of the current version 097 (July 2005) pcd2.m1xx

Firmware Package Hex-files of the current version 097 (July 2005) pcd2.m1xx

EN Archive .zip 0.23 MB Download

Functionality and versions history PCD2.mxx

History Document Functionality and versions history PCD2.mxx

EN Archive .pdf 0.24 MB Download

Software

GSD Files

Software GSD Files

GSD files for SBC slaves

EN .zip 0.66 MB Download

Good to know

The serial port 3 is not available, even not with communication modules like the PCD2.F550, PCD7.F772, PCD7.F802.
The serial port 2 can only be used with terminal kits PCD7.D162 (including a PCD2.F540).

PCD2 / _Firmware Classic

  • PCD Firmware 1.28.16 or 1.24.69 fix the Ethernet frame padding information leakage (FAQ #102011)
  • What are the differences between the COSinus firmwares FW 1.28.11 and FW 1.28.16? (FAQ #102010)
  • Lon Bindings lost after power off / on with FW 1.26.15 (FAQ #101999)
  • What are the differences between the COSinus firmwares FW 1.24.67 and FW 1.26.31? (FAQ #101987)
  • What is the meaning of the PCD history entry ‘FWDnld UnknownFW’? (FAQ #101959)
  • How to find more information based on the error message "SF not loaded"? (FAQ #101568)
  • What does CSF stand for? (FAQ #101566)
  • Which hardware revision of the PCD2.M5_ is needed for firmware 1.14.23? (FAQ #101490)
  • What are the differences between firmware 1.10.51 and 1.14.23? (FAQ #101470)
  • Why can't I send more than 512 bytes using the STXT instruction? (FAQ #101468)
  • Can I have more than 16 COBs? (FAQ #101467)
  • Why is the error bit 7 or 8 set when I try to execute a "Backup DB to flash"? (FAQ #101466)
  • What are the differences between firmware 1.10.16 and 1.10.51? (FAQ #101422)
  • How to define a comma as separator in interpreted texts? (FAQ #101392)
  • Potential data loss on SD cards bigger than 256 MBytes (FAQ #101377)
  • Overview of the current production firmware versions (FAQ #101304)
  • What does "Saia PCD® COSinus" stand for? (FAQ #101297)
  • How to implement a software watchdog (FAQ #101285)
  • Why does the S-I/O communication no longer work on a PCD3 or a PCD2.M5? (FAQ #101244)
  • What is the "WebServer2" on Saia PCD® COSinus systems? (FAQ #101191)
  • Can I calulate with IEEE floating point values on a PCD system? (FAQ #101188)
  • Can I read a value from a PCD text and copy it into a register? (FAQ #101187)
  • Is it possible to search an expression within a PCD text? (FAQ #101186)
  • Why do I sporadically get communication errors when connecting a PCD/PCS in "Secure S-Bus Data Mode"? (FAQ #101180)
  • The XOB 8 is no longer called on the systems Saia PCD® COSinus. (FAQ #101137)
  • What criterias are to be fulfilled for sending e-Mails from the PCD? (FAQ #101054)
  • Why do I get a "68k add Error" when writing a text on the S-Web Server? (FAQ #101049)
  • Why is the message: "Failed to get data on alarm.exe" displayed on the alarming page? (FAQ #100963)
  • Is it possible reading the PCD "IP address" from the user program? (FAQ #100952)
  • How does the system watchdog work? (FAQ #100908)
  • Why are broadcast telegramms not working anymore on the PCD3 or PCD2.M480 (FAQ #100798)
  • New firmware version names for Saia PCD® COSinus systems (a.bb.cc) (FAQ #100741)
  • Different handling of the TBSY flag (in MC mode) between PCD3 / PCD2.M5 and older systems (FAQ #100655)
  • Booter update on PCD2.M150 (FAQ #100606)
  • Firmware download on a PCD2.M150 (FAQ #100598)
  • S-Bus Slave on Port 3 doesn't work with FW 020 on the M480 (FAQ #100389)
  • lose Hardware settings after Firmware update (FAQ #100366)
  • FW depending differences in the handling of the diagnosic flags (FAQ #100321)
  • Incompatibility of old FW and new Profibus DP configurator (FAQ #100319)
  • Which Flash chip to use for which usage? (FAQ #100309)
  • Error LED of PCD is lit! How to find the problem? (FAQ #100269)
  • What EPROM burner is recommended to create firmware chips for PCD's? (FAQ #100256)
  • Baudrate limitation on serial ports (FAQ #100252)
  • Communication interface isn't reset on SW watchdog restart with option XOB0 enabled (FAQ #100243)
  • Software Watchdog mustn't be used with FW 0C1 on PCD2.M150! (FAQ #100218)
  • Firmware version naming of non-Saia PCD® COSinus systems (FAQ #100176)
  • Not all History entries can be found in the Online Help of PG5 (FAQ #100173)
  • Why is the instruction DSP not supported on Saia PCD® COSinus systems? (FAQ #100034)

PCD2 / M1xx

  • Why do the output of the PCD2/3.W6x5 not deliver stable signals? (FAQ #102014)
  • Why is the modem "MDLS144 onbit" no longer working on a new PCD? (FAQ #101718)
  • Until when can a PCD2.M120 be reparied? (FAQ #101482)
  • Why do I get a "DUART HW ERROR" on PCD2.M150 after restart? (FAQ #101395)
  • Why does the IP communication not work with firmware 0F0? (FAQ #101384)
  • Why does my PCD1 no longer start (due to a "Text segment error") after downloading a project with PG5 2.0? (FAQ #101379)
  • Firmware dependencies for the "DB Access Library" (FAQ #101372)
  • Meaning of the error codes for DB backup to flash (FAQ #101284)
  • Is Modbus supported by Saia PCD®s? (FAQ #101270)
  • "Send SMS extended" FBox and PCD1.M1x0 and PCD2.M110/120 (FAQ #101163)
  • RAM chip types to be used as user memory on a PCD1.M1xx or PCD2.M1xx (FAQ #101100)
  • What is the minimum distance between PCD2.Mxxx CPUs and PCD2.C1xx extension rack? (FAQ #100892)
  • Is possible to use two TCP/IP modules on a PCD CPU? (FAQ #100785)
  • Firmware download on a PCD2.M150 (FAQ #100598)
  • Is it possible to download an xx7 firmware to a classic PCD and invers? (FAQ #100557)
  • Can I use the same GSD File for PCD2.M170 as for PCD4.M170 (FAQ #100412)
  • Functional limitation regarding the use of the modem library (FAQ #100392)
  • PCD2.M170 or PCS1: WEB Server works only if a WEB project is downloaded in the PCD! (FAQ #100380)
  • Which Flash chip to use for which usage? (FAQ #100309)
  • PCD2.M150F650: Cannot go online via TCP/IP (FAQ #100270)
  • What is the max. size of DBs/TEXTs in the extension memory of PCD2.M170/480 with a PCD7.R400 memory module? (FAQ #100266)
  • Software Watchdog mustn't be used with FW 0C1 on PCD2.M150! (FAQ #100218)
  • Firmware version for PCD7.F650 and PCD2.M480 (FAQ #100189)
  • PCD7.D7xx terminal works on PGU port of PCD2.M110 but not on PGU port of PCD2.M150! (FAQ #100188)
  • Corrupted Flash user memory makes writing HW settings or program impossible (FAQ #100146)
  • "COM O 255" for Watchdog on a system with PCD3.Cxxx might cause problems (FAQ #100101)

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download